Search results

Ya something is off. I saw 10-11 just below fuel cut y pipe and full 3 in exhaust and ic and pipes. Have you checked for codes?

The fan clutch on a 7m can be very loud and higher speeds it doesn't get used so sounds kinda like that. But a video would help. You can tell if it's the fan clutch by starting the engine and with the hood up it will be loud for a bit and then it should quiten down. If it never does for the...

If you want to keep tems get illumina II. If you don't you can get some bilstiens or some regular kybs. Illuminas are like 3-400$ for all 4. Buddy just got all 4 regular kyb for I think less than 100$ soo. All up to what you want to do. You can also lower the car from stock 4x4 with...

Ya what type of noise? Fan noise? Whineing?

Slides could be sticking or the piston.

Most likely not the Ecu. 51 is for the idl or idle circuit contact. Could be other things to cause that as well too but doesn't hurt to check the tps with an ohm meter. http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=FI&P=101

Fixed :). I'd do the same if I ever got one.

Lol. Have you checked for any codes yet?

Likely not. Not many people have it and most of the people that do don't want a lot of people to have it.

Maybe weld on something to keep it in place.

It's just 3/8 coolant hose. Shouldn't need heat wrap. Stock hose last a long time.

Canton is the way to go. Also mocal t stats are awesome as well. If you want to go cheaper you can get a earls sandwich plate/ tstat and just run 2 lines to a cooler.

There 5v ref, signal , and ground. If your looking at the back of the connector with the clip up blue w red stripe on the left, green/black middle and brown on the right.

Call ati.

Lol.

Stock pipe is fine. IJ. Ran his at 8k+ at 500hp+ and never had an issue with oiling. If you upgraded the pump with one that will be shimmed the oil cooler relief valve needs to be shimmed as well.

There are more out there with mounting flanges too. But they get pricey.

Don't need 2 threads on the same thing in 2 different sections...

I want one too.

There is mil spec connectors. There kinda expensive tho. Or you could just use like 3 big connectors.