Search results

Pics? If its wet around radiator it's either radiator or hoses. Cap could be shot but that's not usually the case for a cap that's tightened to be pissing out.

That's a lot of injector for a stock turbo.

Longer stroke than bore. 7ms usually will have more torque than hp.

There is a port on the back of the intake manifold.

Remove the nut and pull the cable out. There's also 2 bolts holding the cable to the e brake assembly.

2jzgte fan clutch?

Tsrm = Toyota supra repair manual Epc = electronic parts catolog Ewd = electrical wiring diagram http://www.cygnusx1.net/Supra/techtips.aspx

You heard wrong. Or else everyone running rp would be leaking oil all over. It's rubber seals and silicone. Same goes for every engine.

Need I ground the brown wire on the m1 plug. But usually that's for the temp gauge. Need a 7m oil pressure sensor for the oil gauge. Make sure all your wiring is right. Have you tried putting the 87 cluster in? Check engine light is w pin on Ecu and goes to m1 plug.

http://www.cygnusx1.net/Supra/Library/EPC/291420/catalog.aspx?F=8718&P=2

Ya. That is not a r154 throw out bearing.

Wider tires up front will track more with the road. I've ran both 255 and 265 up front and they both do it here and there. But roads around here are nice so it's not much of a problem.

You don't need 2 threads on the same topic.

Blocks are different and pistons are different. Could use a turbo block but with the lower compression pistons it's going to be slow as fuck.

There's like 6 rings and 2 snap rings for the throw out bearing. You need them and in the right order.

1 3/4 open and 1 1/4 open. Retarded eyes? Clean car. Going to paint the hood?

It's going to be able to go the other way without the slave bolted to it. Did you replace the master? If so did you bench bleed it? Sure the master is not bad? To bleed push clutch in couple times, then to the floor, open bleeder on slave and fluid will come squirting out like brakes. If...

Wuld? Google is your friend. Got mine from here http://www.sonicmotor.com/XXR-Wheels-s/7822.htm

eBay. Just google the names of the sellers. Stay away from tigerjapanese. Zerolift is good. Usually every importer is going to have a bad comment here and there. All the time tho I'd stay away. Think I got mine from jdmenginecorp or something like that. Had very low miles or the oil was...

If the bov is leaking yes.