Search results

  1. hvyman

    engine cod 31 and engine wont rev

    no positive. You tested the air temp sensor. That is not code 31. The air temp sensor is in the afm unit and has a seperate circuit and code. sounds like your afm is bad which is usually the case.
  2. hvyman

    LSD Oil

    75w or 80w90 and ford friction modifier.
  3. hvyman

    94 4runner knock sensor.

    Is there a 7m in it? are the sensors good?
  4. hvyman

    H&R springs too low

    You can get custom springs from eibach any way you want. Just call them.
  5. hvyman

    H&R springs too low

    Not really. If its scraping on the fender liner your prolly missing screws. I had h&r an never scrapped anything.
  6. hvyman

    thermostat replacement job?

    Iirc it's 2 10mm bolts to replace t stat.
  7. hvyman

    another clutch kit question

    I have the dm 2800lb and 6 puck and love it. I dd it too. It's not crazy heavy on the foot and smooth when shifting. Just needs a little revs from starting from a stop and it's still smooth.
  8. hvyman

    1jz aftermarket oil pressure sender location. Intake or exaust side?

    Besides a lot more heat in that area you will need an adapter for it to work. As far as the reading it will be fine there.
  9. hvyman

    Ebony: 91 black 1jzgte (proefi friendly)

    Get a nice detail job and bet the paint will look 10x better. What sizes are your wheels?
  10. hvyman

    another clutch kit question

    What are your goals? act extreme will handle a lot. after that should prolly look into a twin disc. I like my dm 2800lb na d 6 puck combo. Holds nicely so far. will be getting tuned in couple months.
  11. hvyman

    List of parts needed to swap 1jzgte into mk3

    2 year thread bump. this thread has everything you pretty much need to know. http://www.supramania.com/forums/showthread.php?153102-Your-1JZ-GTE-And-2JZ-GTE-Swap-Guide-For-Dummies
  12. hvyman

    Source for 1JZ valve cover gaskets?

    Would have to have then shipped from Canada. Or use 7m gaskets.
  13. hvyman

    1jz aftermarket oil pressure sender location. Intake or exaust side?

    Have to use a deep 24.
  14. hvyman

    Roughly where am i HP wise ?

    239whp.
  15. hvyman

    Hatch targa holders problem

    Indeed.
  16. hvyman

    Hatch targa holders problem

    iirc its supposed to slide in above those. Not have the roof part slide into them. Been a while since i took off my top tho.
  17. hvyman

    In-car removal of oil pan

    Won't be able to unless motor is half way out. Pan has to clear the pick up tube. Easier to just yank motor still complete with trans and everything then Reseal oil pan and dump back it. It's a days work. Just take fuel lines ds ic piping exhaust rad heater hose ac if there and drop ps to the...
  18. hvyman

    all around performer

    Hit full boost around 3600.
  19. hvyman

    7mgte wiring help

    Looks like a plug for the a/c. There 2 sensors on the ac lines going down the frame rail. You can see one in that pic.
  20. hvyman

    was this worth it?....

    If they assembled everything doesn't seem bad to me.
View older results
Top Bottom