Search results

still check for codes. Very few codes will actually stay on. Most will be stored.

http://store.driftmotion.com/static/i-7mpshose.php

No that's the idle up valve. They all have that. Pps is progressive power steering. Meaning you get assist at low speed and no assist at high speed.

umm try rock auto or driftmotion. Aaron sells a high pressure hose for like 60$. If you want to remoce the belt you just loose the the slider bolt and the pivot bolt on the ps pump and slide the ps pump towards engine. Long time since i worked on a 7m but last i remember the ps belt was the...

http://www.cygnusx1.net/Supra/TechTips/engine_error_codes.aspx

Those cheap silicone vac hoses suck. If you can pinch it easy so can vacuum.

That's for the tps. The front one is the trac motor and the other side is the tps for trac. Trac tps is different than the engine tps.

What kind of vacuum line are you using. Softer hose can pinch shut under vacuum.

Subframe holds the engine to the front and diff to the rear. It's a unibody chassis. Doesn't have a full frame. The bushings are a cushion for it. The aluminium ones will be more rigid harsher and transmit more noise through the chassis. Poly ones are not as stiff depending on which hardness...

Ya rock auto dot com.

just call a trusted machine shop. Depends on what all you get done.

Sweet build. So is this still going to be finished before the world ends? :)

Can pm Rodel.

Drill it out or run a longer hose. It's under the intake bolted to the block.

Any coolant or oil lose? If its black smoke that means fuel. Have you checked for codes?

Pretty sure it wouldn't run. Exhaust can doesn't have the teeth for the cam sensors.

Could be heater core. Can pressure test the cooling system to verify. Also check the floors for wetness.

What sensor are you using?

Tps been set? Cam crank timing good? Any codes? Is it running better once warmed up?

Can get new subframe bushings and change all the other bushings and ball joints.