Search results

New parts came in today. Shorter bushings, cps connector for my new coil setup, and new front/rear brake lines from Driftmotion He also included 2 life savers.. lol Sent from my PC36100 using Tapatalk 2

i love my holset, it pulls really hard once its in boost, i wish it would spool a little earlier though.. its full spool at 4400 rpm ive been having issues with the 7m low oil pressure making mine not last long, it requires at least 10psi @ idle so im going to have to shim my oil pump then...

car looks awesome! what blow off valve are you running? is that a tial or just a generic 50mm bov

Lookin good! Sent from my PC36100 using Tapatalk 2

i would definitely fix your oil leak before upgrading/adding more boost

The hallman controller looks like a much better quality. I've ran one similar to the second mbc and they are very touchy as far as turning them just a hair and raising the boost quite a bit. I just switched to AEM tru boost, which will be much better. Id get the hallman one though Sent from my...

I plan on shimming it 4-5mm Sent from my PC36100 using Tapatalk 2

I should rename this thread to how many turbos can I blow up lol... So these Holset turbos like at least 10psi oil pressure at idle. So I put a gauge in line of my turbo feed line. Cold start is good pressure. When warm, not so much. I'm seeing 3psi when up to temp, I'm guessing its starving...

I'll get in the top 30 this spring for sure! :D Just need to get that water methanol injection kit Sent from my PC36100 using Tapatalk 2

Thanks! Sent from my PC36100 using Tapatalk 2

7mgte with holset Hx35 with a 62mm billet wheel, 272cams, afpr, tube header, 50mm wastegate, Maft pro 16psi Tuned by Cajunkenny 409rwhp 382 rwtqr I can't find the other dyno sheet, but its 415/392 Sent from my PC36100 using Tapatalk 2

For some reason I didn't get the 415hp sheet in the email, but here is the 409hp sheet Sent from my PC36100 using Tapatalk 2

looks great! everything is so clean i really like that FFIM

Thanks I'm running rc 550cc injectors with the aermotive fpr set to 38psi base fuel pressure. I got whole of my dyno guy, he said he will email me with the sheets in the few hours Sent from my PC36100 using Tapatalk 2

i text jesse multiple times trying to get the dyno sheet, ill try again today and see if i get a reply on a side note, i ordered AEM Tru Boost so i can dial in my boost a loooottttt easier.. no more touchy manual boost controller :D after i get that installed i'll order the new AEM V2 Water...

I was thinking that could be a lot of the problem as well. Really the only thing I can think of to raise idle oil pressure is to take off the front subframe, pull the pan and shim the oil pump relief spring. I ordered a fitting I can put inline of my feed line and see exactly what psi I'm...

In getting the correct oil pressure under load and on startup What size restrictor would you recommend since I'm running -4 feed? Instead of -3 Sent from my PC36100 using Tapatalk 2

I sent off my stock hx35 off to driftmotion about 7-8 months ago to get the 62mm billet wheel upgrade and a full rebuild. right off the bat i noticed smoking at idle, the turbo lasted about 6 months then i went to start it up one day and a huge smoke cloud came out of the exhaust. turbo was...

first video second video also new addition to the family. 2004 R6 i just picked up the other day

Thanks Kenny! Great day at the dyno, 415hp 392tqr to the wheels! Pretty happy with the results. I'll post up the dyno sheet once I get it emailed to me Sent from my PC36100 using Tapatalk 2