Search results

Runs great with the stock exhaust housing, full spool around 4400 rpm. I think its off a 98 cummins Sent from my PC36100 using Tapatalk 2

Little update, out with the old, in with the new cooler. mounted the oil cooler right behind the bumper where the fog light would have been Sent from my PC36100 using Tapatalk 2

I'm running one as well at 17 psi, mine was bored out with a 62mm billet wheel from Driftmotion though. It pulls really hard. I love these turbos, but haven't gotten it to the dyno yet *not sure why the pictures uploaded blurry but can be viewed on my buildthread Sent from my PC36100 using...

Well, after do a lot of research, I hear that these holset turbos do not like high oil pressure, especially on gas engines. They like to see a max of around 40 at full rpm. Since this turbo started dumping oil at cold start just warming up where oil pressure is 50-60 psi, I'm thinking that's way...

I wish I knew the issue so I could go after it and fix it. I was told specificly not to run a restrictor on the holset turbo, I wonder if that could be wrong. I doubt its blow by as its a pretty fresh rebuild and was built with tighter tolerances. I'm running about 3psi idle and 25-30ish psi at...

I will get you a picture hopefully this weekend, ill be pretty busy this weekend though. I was told to not run a restrictor at all, so that's what I went with Sent from my PC36100 using Tapatalk 2

definitely not, im not sure what the deal is.. 2 stock ct 26's, hx35 used was bad, rebuild from my friend didnt go well, now the turbo that was suppose to be really nice..failed. maybe im having oiling issues, or could just be a coinsidence

Pulled the turbo, it was definitely the issue. Sending it back to Driftmotion for inspection and they may or not repair it under warranty. We will see what happens Sent from my PC36100 using Tapatalk 2

Didn't think of that. I will definitely be putting a boot back on that alternator Sent from my PC36100 using Tapatalk 2

Some good and really bad news.. I got a new battery and alternator installed.. yay. Bad news. Turbo is probably blown. Started her up, let it idle for a few minutes making sure the voltage on the battery was ok with the new parts. Pulled out of the driveway and filled my whole street with...

As requested here are some pictures of the new Enkei EVO 8 wheels These are with 245s in the front and 275s in the rear. I think these wheels are 9" wide, they don't bulge out as much as my old 8" wide wheels Sent from my PC36100 using Tapatalk 2

I purchased a 2003 Chevy Silverado z71 ltz for 1600 from a of mine. Last night I went over to help my gf aunt move, hear a big crunch and walk out to the side of my bed smashed......the lady got charged with hit and run as well as no insurance. I was also putting together a mk4 supra and...

not not exactly sure what my fout is set to, but i could find out. while tuning we did hit a "rich" fuel cut, but he quickly tuned that out. i cant wait to see what this does on the dyno saturday, weather permitting. i think its suppose to be in the high 20's low 30's i actually havent taken it...

im running the rc550cc injectors still. base fuel pressure is 40psi without vacuum. seems to be doing great, im not sure how much more i can push the 550 injectors though

New wheels are on and look great! Just took it to cajunkenny for a tune, runs great now. I also have dyno time lined up for this coming Saturday. Finally! Whooo Sent from my PC36100 using Tapatalk 2

They are never done! Lol Sent from my PC36100 using Tapatalk 2

i ordered the wrong hub centric rings so when i recieved them they didnt fit.... anyway, the new ones are here and ready to be put on when i get back from seattle on friday...woohoo

Installed my new door sills and my 30* coupler for my intercooler line Sent from my PC36100 using Tapatalk 2

Installed my new door sills and 30* silicone coupler on my intercooler line Sent from my PC36100 using Tapatalk 2

Haven't been doing much lately, my knee has been killing me from a motorcycle injury several years ago. Went to the doctor and got a hydrocortozone shot so it should be good for awhile.. Anyway, not much progress other than looking at my parts in my room waiting to be installed.. Lug nuts for...