Search results

Should have gotten a blackberry storm. It had all of these functions from the begining.

So I shouldn't use the one that came in the gasket set?

I purchased an engine gasket set from driftmotion and I was reading somewhere that suggested not to use the exhaust manifold gasket from the set. I will be running a boss turbo, should I use the one that came with the set, order one from toyota or just get a felpro gasket? Here is a link to the...

The price there seems a bit high. You would also need the ecu, wiring harness and an ignitor along with other small odds and ends like intake and egr block off plates. (things you could easily purchase here from the classified section. I would also look into DriftMotion. They are one of our...

I believe hes referring to modifying the oil pan like group A did http://www.supramania.com/forums/showthread.php?t=3321&highlight=group

Iv done this swap on my 90 supra. Blew the HG and now im in the process of building it up for 500hp. This will be helpful: Copied from GrimJack's writeup

If your upgrading the exhaust, might as well go with 3". Other than that, upgrade the stock ct-26 or go with a bolt on turbo and upgrade the fuel system.

Cant really give you a definite price. It depends on if your wanting to put new parts on the engine while its out (such as oil pump, timing belt, etc...) My point being, there are always unforeseen costs. If you have a factory 7mgte supra that your taking parts from it will be a lot cheaper than...

Your wanting to swap out a twin turbo for a single? or a 7mge for a 7mgte?

A quick search comes up with several... http://www.supramania.com/forums/showthread.php?t=78996&highlight=leatherseats.com http://www.supramania.com/forums/showthread.php?t=78644&highlight=leatherseats.com

Since there rare over there, I would say get it and fix it up. Just know that with all the visible rust, there will be a lot more that you cannot see by just looking the car over. Be prepared for the worst.

polished mine, hard to see them underneath it all:

Like mentioned above, depends on what kind of driving you will be doing. A full face clutch will be more practical for everyday/traffic driving while the 6 puck would be more aggressive. EDIT: After reading your mods in your sig, I would suggest going with the 6 puck. Iv only heard good things...

+1 for the battery terminal puller. Iv had to use them a few times when pulling wiper arms off.

I have personally used several sets of felpro valve cover gaskets and they have never leaked a drop of oil. It comes down to how well they were installed and if the bolts back off.

I am not sure what you are referring to, but you should not jack your car up with the top off.

pictures are necessary for us to help determine a price

How would I put a loop in the main and watch for y or q

That sounds like a good idea. Would I have too drill out the hole in the water pump or is it big enough already? I wont be home for another week to look for myself. Thanks

No, it didn't go into the block. Here is a pic to show where its at. (This is not my engine, for reference only.)