Search results

yep, you can take the "filter" off the throttle body. id also cut off the cooalnt ports unless you plan on running coolant lines all the way up to the throttle body. i would recommend getting this throttle cable...

ID1000cc install - CHECK Updating firmware on EMU - CHECK calibrating new sensors/injectors in the emu software - CHECK man im glad i picked up those injectors when i did, i couldnt imagine paying 720$ for them. i got the harness done and pins connected but i didnt wrap the harness or put...

When using a standalone ecu and controlling the factory 7mgte IAC, is it necessary to route the valve back into the turbo intake tube as done in the factory setup? Or would it do me just as good to run a small breather filter on the valve itself. Similar in size to a small breather that would...

I laid the new harness out over the engine and start marking /cutting each wire to length on each sensor. I added a couple inches to each, already somewhat long, wire just in case I decide to move the harness to a slightly different location. I'll be using a 3 pin deutsch connector for the...

My windshield shade came in so I threw It on since I'm building a harness and my car is just sitting out in the sun Sent from my LG-LS980 using Tapatalk

Wow, that really doesn't line up at all. Maybe there was some sort of error on yhe mold making process and you happened to get one of the bad ones. Might be worth a shot to send in those pictures to the company you purchased it from. It's a shame it didn't fit, I really liked the look of that...

Yes sir, it's a true hardtop with no sort of sport roof. Although I'd love to install a sunroof, I don't really want to mess with the factory aspects of the car to that degree. I snapped a picture of the roof for you. I also got quite a bit done on my new wiring harness to the Emu. I...

Started making my new wiring harness to the emu. Should be much smaller and will be taking out a lot of wires that aren't needed Sent from my LG-LS980 using Tapatalk

I'm not sure if the exhaust housings are available aftermarket like the hx35, but you might look into a short outlet exhaust housing to make fitting a downpipe easier. Looks great so far man Sent from my LG-LS980 using Tapatalk

Thanks man. Yeah im not too sure why the sound cut out, it disappeared when I slowed the video down in the gopro video editor. There is an original video clip on my photo bucket with all of the sound in tact Sent from my LG-LS980 using Tapatalk

Put a little wax on to make her shine with the nice weather we had today. Turned out much better than I was expecting Sent from my LG-LS980 using Tapatalk

small update. the soup drives MUCH better since the alignment. i had a slight steering wheel shake, but thats gone now. since my tires are near wear bars in the back, i decided to do a small burnout to help speed the process of buying some new tires. i think ill go with a pair of Nitto NT05 in...

If you haven't put oil in the engine yet, you may look into a fumoto drain valve for the oil pan. With just the twist of your finger, it makes for basically a mess free oil change if you go with a oil filter relocation Sent from my LG-LS980 using Tapatalk

Man that looks amazing Sent from my LG-LS980 using Tapatalk

Black would look great imo. Is that an hx40? What size exhaust housing did you go with, looks like it may be a gillet housing? Sent from my LG-LS980 using Tapatalk

Looks good man! Your attention to detail will definitely make your car stand out Sent from my LG-LS980 using Tapatalk

I think I remember him saying he only bought 2or3 shirts Sent from my LG-LS980 using Tapatalk

There's a website originally called winagtr.com which was put on by 80eighty. What you do is go to 80eighty.com, buy a t-shirt (every 5$ spent gets you an entry) then when the giveaway ends, someone wins the car. The r32 was the first giveaway, they just gave away a wide body TRD supra built...

Thanks man, much better than that surface rust color for sure! He did, I'm not sure if you've ever heard of winagtr.com or 80eighty dream car giveaway but he won their first giveaway car by buying a 25$ t-shirt from their website! They just gave away a wide body twice turbo supra bolt by...

Painted my calipers red and my rotors black. Looks much better than faded red calipers and rusted rotors. I also stopped by my friends house to help him with his 240 strut bar. He also won the 80eighty gtr giveaway car. I also got the rest of my connectors from driftmotion. Just waiting on...