Search results

Yes dowels are in place, in fact I can get the front 2 nuts on and that is it. yes, I did a quick search but as you said didnt find anything. just about 50 thousand treads about the differance between studs and bolts

As the title states I trying to bolt my head down and the nuts from my ARP head stud kit dont fit in side the head. It looks like the nut base needs to be 10-30 thou. smaller. WTF. I have been out trying to get the nuts on the studs for the last 2 hrs. The nuts are the correct ones 12x1.25...

Forget about the OEM headgasket, your just asking to redo this same process again. Call suprasport and get the 1.2mm HKS HG for $105

Well its not pulling on the cable, if anything it is trying to push the cable back into it self. I just tacked the ball onto it for now and will do some testing, to see if it will work, or not. I would like to have it act independently but for now we will try it this way I guess, and redo it...

Dose any one have it working? I am/want to keep the oem cruise control with my ffim set up. The throttle body is a custom 4". I noticed on the stock cruise control the linkage is like spring loaded, and looks like it doesn’t move with the throttle, it is independent. Then once set the cruse...

Check fuse, if it is all good, you might have a leek some where, and there is not enough pressure in the system to so the high pressure switch is not connecting. I think there is a "repair a/c at home" or something like that in the FAQ's. Also is the clutch engaging for the A/C compressor...

Save a couple more dollers and buy some eagle rods from SIP (suprarich). He hooked me up with a great deal!!!

Lets see here Is this what you are saying "I want to pass emissions tests, but I have no emissions crap on my car because I installed a JDM motor." Ummm.......lets think about this one, this is a hard question to answer. I think the answer is simple "PUT THE...

Are you giving your intake manifold the shocker????? LOL. What do you think of that TB? I have also looked into buying one since it accepts the stock TPS. Speeking of TPS what sensor dose it use? pre 89 or 89+

lol

WTF they charge $20 shipping on a $10 part that is plastic. I'll wate.

I'm going 2.5" on hot side and 3" on the cold side. if this helps you at all.

I dont know what shipping would be but I am guessing you can get the small twin fans from a member here for a good price something like $20 or less plus shipping..... Hell I might even be selling my small twin fans from my 89T. I first need to run my intercooler piping and once in I think I am...

:boobs::boobs::boobies:::w00t:::bowdown: Vary nice, way to go!!!!!!!!! thats moving in the 1/4 mile

Just had them installed (.040 over) in my 7m. Haven't started it up yet but my engine builder said they fit good, look good, and quilty is right up there with the best :thumbup:. He was surprised :aigo::aigo::aigo::aigo: when I told him the price and how affordable they were. I think people...

COOL!! thank you every one for the help and quick answers. I just got done making a Vac. manifold out of t6061 alum.:icon_bigg It is 5" long, 1" tall and 3/4" thick. With the end having a 1/4 npt thread tapped into it and (6) 1/4-28 threaded holes on the top. So there is 6 1/8 nipples or I...

I might even be in for one more If you need to get more for a better discount! :)

Deposit sent!!!!

I knew I would forget one Mr. Y got it connectiong (MAP). Ok so here is what I am thinking Go (3) 1/4 npt ports on the bottom of the manifold and one on the back. Use one for steering valve, one with 3/8 hose feed to distribution block and one for future map sensor. And the back one being...

Ok I will go that route. One for brake booster and one large one going to the distribution block. What size of fitting should I use coming out of the manifold going to the distribution block? NPT 1/4 with 3/8 hose be good? Also with the brake booster port on the back of the manifold (by fire...