Search results

  1. M

    .25 amp parasitic draw through dome fuse

    It means your dome is getting power where it should not be getting it from. Its back feeding off another circuit, somewhere along the wiring.
  2. M

    aftermarket tie rods

    Please read post #13
  3. M

    Doing Brakes

    Alot of aftermarket rotors are warped of the box. When I did use aftermarket rotors I cut them before I used them... and shure enough it didnt cut straight like a new rotor should.
  4. M

    Spotted: Homer Simpson on Craigslist

    Oh my Darwin... I've seen it and now I cant unsee it.
  5. M

    Need help installing factory seats

    86.5-88 seats have the knob on the drivers seat for the recliner. 89+ are power recliners But yes it will fit.
  6. M

    aftermarket tie rods

    When installing them just cover them in copper slip, and reapply when it your under the car. We do this at the dealer it makes for easly allignments 6+ years down the road.
  7. M

    The ABS LIGHT

    uh if its red its not the ABS.
  8. M

    replacing parking brake?

    Hardware kit shouldnt be too much... (its just springs and pins and clips) Unless the adjsuter broke or the star wheel is completely rounded off and not staying in place. Best go in person and ask if there is a kit other wise just order the spings, pins and the horse shoe clips.
  9. M

    Last Straw No Start Issue

    Possible areas. Battery - starter wiring (positive/negative) - starter - Igntion cylinder wiring or Neutral saftey switch. Chances its starting while your hitting it is luck, if you truely put 4 starters in it already.
  10. M

    replacing parking brake?

    Do yourself a favor buy new hardware. Ask yourself "Do I want to mess around with 20+ year old clips and springs?" Also make shure you get all 4 shoes, I know Toyota sells them all seperately. And as a side note park brakes do wear out eventually, the primary shoe (the ones that face the front...
  11. M

    fix one thing, another breaks!

    Its been absorbed into the carpet and probaly dried up now. Or check under the hood for bubbling paint around the CMC. And no you dont need to remove alot. Just the under dash plastic panel and the pedal it self... its a bitch to do but its do-able.
  12. M

    One brake light won't work

    Actually its not. The tail light always stays on the brake light fillamint is brighter and over powers the tail light.
  13. M

    Tems and sadness

    Im sorry for going OT but how does it take 6 DUI's to land someone in jail. Here in Ontario 1 DUI your fucked for life. Most inssurance companys wont touch you, and the ones that do its something like $20,000 a year. Plus you have to get a breathalizer lock installed in every vehicle you own at...
  14. M

    One brake light won't work

    When tail lights are on and then you hit the brakes does you tail lights stay on or do they shut off?
  15. M

    High possiblilty of BHG

    Ok 1) The hoses are fine as they're other members here currently using them with no problems. 2a) The only reason I put the cap on with the channle locks is because I know I still need to trim a bit of the rads neck thats not an issue. 2b) A used OEM rad is now at least a minimum of 10yrs old...
  16. M

    Auto tranny limit?

    If you running an aftermarket rad without a cooler built in then yes. You wont even make it a couple of hundred miles without it.
  17. M

    omg guiz! look!! holy shit this is the nicest supra i have ever seen!!

    Its so bad its hilarious. He cut an opening in the hood for the boost pipes, and for the exhaust out of the turbo.:: lolsign ::
  18. M

    High possiblilty of BHG

    Unfortanatly I couldnt tilt it but I was going do that work this weekend. But I should also mention that when the 2nd pump leaked it drew out ALL the coolant out of the car. So I figured now was a good idea at the time to change the coolant hoses. (I bought that eBay coolant hose kit... its...