Search results

Those are cool, can I change my screen name?

Don't mess with Jeff:biglaugh:

Here is another cool tool !!! But expensive. http://www.toyotool.com/valvemaster_instructions.htm

Car Phone??? I think back then you had to have it mounted in the trunk they were so big.

I was going through some stuff on my new 90 N/A project car and came across the TEL 15A fuse in the fusebox in the engine bay. I have no idea what this fuse is for and my TSRM doesn't indicate what it is either. Any input guys???

I used SEM paints, they worked awesome on the vinyl and leather but not so hot on the hard plastic pieces.

Two nuts under the dash. Right one isn't bad but the left one......:aigo:

Good job on the worksheet. I made one also with Excel when I did my head and my valves. Mine worked wonders and saved me a crapload of trial and error time.

I just removed my dual FAL 210 setup when I had to swap out my radiator. I had the fans mounted using those stupid plastic ties that go through the fins and it caused my radiator to leak. I ended up putting my stock fan/clutch back on until I could order the correct mounting brackets from FAL. I...

The vsv is under the intake manifold (there are two of them). Good luck getting to it if the engine is in the car.

Here you go guys.....I haven't done it myself yet but I am planning on it. http://www.autosoftsys.com/supra/voltmeter/

Here are a couple of pics that I hope helps you.... Pic #1: RSS connector on the R154 (Driver's Side) Pic #2: Reverse light connector on the R154 (Passenger Side) Pic #3: Engine harness connectors. Gray one on left is for the EGR valve, White two-prong is for the reverse lights, White...

Scratch that, sorry the plug I was referring to is farther down the loom. The plug I think you are referring to is near the starter and goes to the EGR valve on the later year MKIII's. Gray one on left....

Double check your pps. I checked my 90 parts car and that is what it is for.

You shouldn't have to remove the oil pan to change the RMS. There are four bolts that go up throught the pan into the seal housing. With a little elbow grease, after you remove these four bolts and the bolts holding the seal housing on you should be able to gently pry the housing off with the...

If your car is a '90, it looks like the progressive power steering plug. See at the bottom of your steering shaft if there is an additional mating plug for that one.

I don't trust that style of stand that you are looking at since I've had one almost collapse on me a few years back. I prefer this style, it is quite a bit more stable. http://i5.ebayimg.com/03/i/04/1b/9f/9c_2.JPG...

Ken, You didn't blow your gasket at the track a couple weeks back did you??? It was good to meet you there in Sac, awesome car btw and I love that boost gauge - definately write-up material !!! Chris

Not too sure of all the colors but I do know that the main body is 920 Silver, 206 on the spoiler, Super Red on the bumper and nosepiece and burgundy door :biglaugh:

Wow, that's a cool diagram, where did you find that one (link please)??:naughty: