Search results

Hello Ian, I have machined the late 7M block and wile they are being machined you can see the differences. My machinist praises the JZ blocks and wonders why the the 7M was not made like it. The rods on the 7M are weak. When I had my 7M it was a good rebuilt. one of the rods opened up...

HP and torque on the yellow boxes are with low compression on two cylinders. HP and torque in the green are with a helthy engine. Same mods two different engines. The lower HP engine had detonated and took two cylinders with it. faulty fuel pump is to blame. No torque claims are stupid. I drive...

To answer that question, here is my best answer. I’m sure I left some out but these are the ones that come to mind. Casting and metallurgy is the first thing that comes to mind. Pistons are better, rods are stronger. The coolant passages in the head are light years ahead, the block is...

What is the fuel preassure at when you don't run Vaccum to the AFPR? When you reset the ECU (unplug the battery) the ECU needs to learn the fuel mixture and it looks at the O2 Sensor to find the right iddle. Also the iddle speed control valve gets sticky over time. You may want to clean it out...

I have been doing this for a very long time. I have all the specs.

I have my own line of 1jz head parts and also 2jz head parts. I’m working closely with my machinist to get shim less buckets at an affordable price. I already have better guides and valves and upgraded springs. Dual valve springs is not an issue. I can have cams made custom to your head...

you can get those on Ebay all day of the week. that also goes for all the IC piping. I think his website is cxracing.com

The biggest give away that it is an Aristo ECU, is that plug that is cut from the harness. The plug is always part of the engine harness on Supra engine harnesses. and that ECU is from a Aristo like most have said.

I wouldn't mind putting my 1jz against your 7M any day. :biglaugh: :sarcasm: ;)

Naw, It's your electric fans. It's so hard to crack a head and/or blow a head gasket.

You use electric fans? :3d_frown:

Supras don't have clutch cables they have lines.

Toyota jag bell housing bolts are 2jz and also the valve cover bolts. Preassure plate bolts are off a 7MGTE preassure plate.

I have one engine set in stock right now. PM me for more details

The Main reasons why companies dont make Anything for our cars is this attitude. If it's a replica and it looks close to the original is ok to use. The chinese are good at R&D (Reserch & Duplicate) and that is the easy way to make a buck of some poor kid. When the car is on fire due to a fuel...

Get a Stock ECU and buy my HKS Fcon V. It's tune for a Single, 550's and some other goodies!

build thread 2.0 http://www.supramania.com/forums/showthread.php?t=58621 Taking a new turn.

Nice numbers Jay! I tried to match that GT35R to the HKS 3037 turbine. I knew it would make some power sooner or later.

Space shuttle hoses? :sarcasm: :biglaugh: Nice Ron!

I have to add my few cents in this one, because I see alot of oil talk all over the place on this forum, and I was waiting on someone to mention this oil. I ran this oil on my last 1jz for almost 150,000 miles. I blew the engine do to overboosting. But I have pictures of the engine bearings...