Search results

Here are some pics: I'll post some more pics of the car when I get off work.

Well guys, got the motor in and started right up. But a few issues that I have encountered, my speedo doesn't seem to want to work, my Zeitronix gauges doesn't work and my car isn't running correctly. It was running pretty good but I all of a sudden the car started sputtering like I had a...

Call Best Trans, sean has the 350 in his car and running 9's.

Well I got the motor in the car, tranny and driveshaft bolted up, exhaust bolted up, and most of the harness is plugged up. My slave cylinder is broken though, one of the ears that holds it on broke, getting new one! I think that I should have it all done today! I'll post up some pics later...

Well I got most of the motor put together and all the injector clips soldered. Now just have to wire in the Zeitronix. Have to go to the store and get some more wire to extend the Zeitronix harness, get an adapter from serial to usb, have my wide band bung all welded up, pick up my timing...

It's going to be a while for me as well. I have to break in the motor and I'm going to get it about 1500 miles before I do any racing!

Thanks paradox, I looked at some old pics and you have it right! Jay, I was just looking for the clip colors, not the wires. But thank you for looking. Have you been to the track yet?

Thanks Jay, I would appreciate it!!

Hey guys I'm about to wire up some injector clips for my new PTE injectors. But I need to know what color order the stock clips are? I know that they are Brown and Grey and and they are every other injector like brown, grey, brown, grey, brown, grey or vise versa?? I'm about to do this so...

Well I just found out that I'll be able to go and get my motor today so It will have about 24 hours of Cure time before I'll be able to start it up!

Going to pick up my motor today!!! I thought that I wasn't going to be able to do this until tomorrow. How many of you wanna bet that I have it running by tomorrow night? All I have to do is wire my Zeitronix up and injector clips and that is all the wiring mess I have to do. Other than...

Look at the wires under the Fuse box and make sure all of your fusible links are good and everything is hooked up right. Also is anything touching the top of the alt where it connects to the battery?

Just like the title says, just wondering on how soon I can add oil and start the car after install? I have everything so far ready to go, I'm getting my motor back on Thursday and will be putting it all together and dropping it in. How long does the FIPG take to cure? It will be atleast 5...

Well There wasn't all that much that I could do today with out my motor yet. So I just stripped and painted my oil pan and some other parts. Also got my Zeitronix wide band today with my 3.5 bar map sensor too!!! I didn't have the time or money to have the parts powder coated so I just...

The HKS I had was on there for 4 years at over 400rwhp and 75+ drag passes, it finally blew because of bad fuel injectors. I do like how the Titan/Cometic is thicker between cylinders than the HKS. That is why I'll be getting another one.

Thanks Ben,Trying to get most of it done on Thursday. So I'll give you a call.

The real only way to do that is just to make a hole like group A or something similar. The other thing that you could do is get an IC plate/cover and that will keep the air flow in the IC part of the bay.

Thanks guys for the kind words! Jay, I'm actually trying to get ready for the IFO this year in November, will do a tranny rebuild before then as well. But yeah going for mid 11's.

Nice build! I doing something similar with my car. I have a boss turbo as well and looking for mid 11's!

I would love to modify my pan just don't have the funds right now. Is there something that I can do to clean it? I planned on stripping the paint off of it as well. I'll see about taking it to a shop tomorrow.