Search results

Other than the area around the front diff nose, any other areas that should be welded up for durability? Mine isn't cracked yet, but I'm setting it up to have it ass kicked in the future without cracking. If anyone had pics that would be sweet/

I guess you need to buy the rear bumper also hey Well..maybe not after looking at the piece more Any price idea?

It is because Toyota = FTW

It's easy. Come the 3 hours down to me if you want to test drive one.

I think the 90+ Kouki 7MGTE should work, same R154 it's getting bolted to. My computer at work shows about 180 for re-man, 230 for new

I've got some 12kg spring i could put f/s for you, they are genuine Tein I know somebody too that I might be able to round up some 8's from

FYI, I like it. Good clean look, very JDM Nice Supra I don't know why figgie did a lot of his mods, so different tastes I guess

My friends that have the RT615 say that it is awesome and is a great value for the money. Much improvement over the ZE512, FK451/452 They are on my list for sure

Measure the total width of the wheel or read it off the inside of the wheel. If it's a 9 inch let's say, measure 4.5 inches on either side to get the middle. Then measure the distance from the mounting surface to to that centrepoint. If the hub is closer to the car than the centre, it...

Yeah...from looking at the valve cover, anything above the "slosh plate" that is inside the cover seems to be the oil mist area. This guy bags the car hard with a 70+mm turbo and there was no oil from the exhaust and the catch can was not full at all I'd be more concerned with a high...

For sure, -10 from the t between both cam covers to a can, then to the intake tube

No sorry no real pic. The hose is -10 size high temp blue silicone/rubber The cover still fits I just started to do it on mine I will make a real pic when done unless someone posts that it will explode the motor

It won't rub at all, ever

Seen this the other day on a tuned single turbo 1JZ The PCV hose on the turbo side valve cover would have been about 3/4 inch from the turbine side, and would have melted. So it was plugged and the oil out was taken from elsewhere. Seems ok to me...opinions? It still has vaccum through the...

I've got just the LS for you

I dunno Kinda unfortunate, but it sems nothing this guy does seems to work out in his favour 2 weeks before the turbo incident, he tried a drag attempt in front of of 5,000 ppl with the hood unlatched. Needless to say, that was not very beneficial.

No not ebay Sometimes a new dollar brand turbo is better than a worn out JDM I don't know what it was

A guy I know put some random ball bearing turbo on his 1JZ The center section cracked and the water in hose leaked into the oil out hose = Oil pan full of antifreeze, and burnt crank bearings

Go 1.5 Then you can be done in a weekend It will be so easy. New plate : 1JZFAIL

How many times does Jeff Lange need to post his paragraph on every forum in the world before ppl will uses search and learn about the history of Supras