Search results

Fuel pump resistor circuit or afm load point would be my guess

Also following on SF, glad to see more updates

I got excited thinking I was going to find a real update in here Diego!

I finished up rewiring the new oven I picked up and installed some tracks to roll parts in and out. Not really supra related but it allowed me to do my next batch of parts in one shot which was so much quicker Did the first batch of parts in it a few days later. I primered my Lower Control...

When do you plan on shooting the fender to match?

Finally got my new oven online and primered my LCA's, rack and some other misc parts.

Looks great, personally I'm not big on coated compressor housings unless it's black. Looks cheesy to me, cast or texture black would be my top choices.

400 should be very achievable with that turbo. A 57 trim will do 350 pretty easily with supporting mods, and 380 is doable with a very good tune. It should spool pretty well with the .63 also, I would think that it should be well matched to the cold side. A .58 might choke things up top. I...

It's discussed a little bit starting here.http://www.supramania.com/forums/showthread.php?183939-Ridiculous-1000HP-7M-Street-MK3-Build/page19 I thought I saw it mentioned somewhere else but cannot find it now. Seems rare but it has happened. Likely caused by a stress mark at some point, I have...

No problem, good luck with the rebuild.

Hardware store they are just m12x1.25 bolts. Stock headbolts work great if you have a set laying around.

Never had an issue with aisin, it took some solid abuse at just over 300 whp. Also one of the clutches Aaron @ driftmotion has recommended forever is a stock disk with a stiffer pp for moderate power. Granted the 154 clutches are slightly bigger so it may be a different animal. I have had great...

Strange, I had trouble even finding myself searching google or instagram from my pc? I wonder if it weights search placment on followers/following over how close the name match is? Or they just have a truly awful algorithm, I put in ryan.payne and get things like "ryan.payne83, _ryan_payne...

IG name is in my sig, I am starting to use it for quick updates on my build since its so easy to post compared to here and I feel like its less annoying to others than posting a bunch of stuff to FB all the time. Its also great motivation now that I am following you and some other supra owners...

Subbed to see what you come up with as well. I have a set of 1zzfe coils sitting on the bench right now.

Made some progress over the weekend, not a ton to show for it but I finished stripping this batch of parts. Lower control arms are ready for coating and new bushings and ball joints Upper arms are cleaned and ready for clear coat. Then they are ready for new bushings and new boots with...

Nice numbers, and on a mustang dyno to boot.

^ My brothers 335 has the same issue, its driving him nuts.

Sounds similar to what I did, adhesive label maker + clear heat shrink.

Looks great, Its really gratifying the first time it fires up after all that work. I cant wait to go standalone so I can build a harness from scratch and change somethings. I kept the factory harness the same for the most part but with I wouldn't have now. I would have liked to split it into two...