Search results

Well I've been battling this issue along with many others since I've "fixed" the BHG... Its been on-going...almost 2 years now arrr... Anyhow, I am getting code 12 with HARD COLD starts, takes 2 cranks to get it going and then it stumbles a bit then all is fine. :1zhelp: TSRM SAYS...

How long would you think those lasts for stock boost?

oh didn't realize it was MKII with a 7M. NICE

what are your mods and what were his mods?

That's weird, that means my transmission ECU must be busted then. My speedo did not work for the longest time on my 88 turbo supra... I've gone WOT and put ECT function on and it shifted through all gears fine. Well you did say "usually" so hmmm...

How are they affected by speedo cable? Maybe i'm missing something, but I drove the car around and it didn't complain about the speedo cable not working not was I Experiencing any malfunctions in the car...

Does it have rough cold starts? or is this happen any time you start it? After the 7-10 seconds, is the engine all fine?

I just did my Bosch BOV mod and that thing is super silent at stock boost. I got the porsche spec one with the metal diaphram or something. At 3.5k rpm, i can hear air releasing very very fast and short crisp whoosh noise, but its very silent. You gotta listen for it. This is with an aftermarket...

stock for stock... a turbo supra is no match for these newer faster compact cars. the only way we can keep up is to modify

try a long flourecent light bulb, those are suppose to be very straight from what i hear.

Man I got white smoke on startup... I changed my valve stem steals.. I'm beginning to think that whoever installed them didn't do a proper job OR the seals I got were no good... I heard Toyota Valve Stem Seals SHOULD BE ONLY used!!!

Man I got white smoke on startup... I changed my valve stem steals.. I'm beginning to think that whoever installed them didn't do a proper job OR the seals I got were no good... I heard Toyota Valve Stem Seals SHOULD BE ONLY used!!!

PLace it there would be a pain to route the hoses. I would rather somewhere closer to the Cam covers where they PCV pipes come out of.

I would get someone to do it, but theres rust around the windshield area that I must take care of first. Maybe I will take out the old one myself and clean it up and then let them come and just paste the glue or watever onto the windshield and set it in for me. I can take out the glass and I...

So I have to replace my windshield. I would take it to someone to do, BUT theres som rust around the windshield that needs to take care of, so I will do that part. I've read the TSRM its got all this whacky stuff you need like primers etc. I thought you just need the Urethane that comes in a...

Lol shit, i didn't realize i posted in the 7m-gte section only.. haha.. going to the general i guess..

So I have to replace my windshield. I would take it to someone to do, BUT theres som rust around the windshield that needs to take care of, so I will do that part. I've read the TSRM its got all this whacky stuff you need like primers etc. I thought you just need the Urethane that comes in a...

Awsome find, I dream one day I will never see rust. Try what he said above ^^^ 1) Check the resistance on the cold start injector. If its good, then take it out and dip the spray head in some break cleaner and let it sit overnight. They can get really gunked up over 16+years and prevent...

How about JB Weld?

Straight up. WHO doesn't want to save themself some money? I certainly do not have money to throw around like some may have for the Supra. I think they just bought a catco cat and stuck their own flanges. I will do the same too. Ebay magnaflow cat is the shortest 3inch one I've found for...