Search results

Guys, I am REALLY struggling to make time to finish the swap and associated work. Needing some help (maybe next weekend). Will pay hourly for experienced Supra guys and do the Beer/BBQ thing. Oklahoma and nearby PPL are welcome (bring some sleeping bags). I had my digital cable w/HD installed...

Does anyone have a link to the 2JZ single install write up? I've already removed the twins. Getting ready to put my single on and it's been a couple of years since I did the last one. Needing some general info, to make sure I don't miss/forget sumthin'. Thanx, E

Target vehicle... Gonna do it right with the 91 I just got. Moving the 2JZ to it and adding a few goodies along the way... Oh... I am addressing suspension, interior, and engine... from the get-go (18" wheels, brake lines, springs/struts, rotors, single kit, Dynamat,etc)...

Okay ya'll.... searched and searched and still no definitive answers. I used an aftermarket ~$40 antenna (Hirsch) for my 87T and all was good. I now have a 90 and 91 and have not been able to verify which one I can use, which would work w/the 3-piece spoiler. Is anyone using a non-Toyota...

CKAnderson is the bomb!! http://www.supramania.com/forums/showthread.php?t=46390&page=2

I searched and was unable to find any threads on the topic, but am almost sure one existed (maybe a few years back). Anyways, a loooooong time ago I bought a generic set for my 5-speed pedal set, but the accelerator one would not work fit. What can anyone recommend that fits and looks...

Looking at options with my next swap. If I have a JDM 2JZ, Auto ECU, auto flywheel, MKIII auto-driveshaft and shifter, would I be able to bolt up a 1JZ tranny from a Supra or Soarer (the target car is originally an auto). I can pick up a 1JZ auto tranny for next to nuthin' (~$100) and not...

Doing the SS brake line swap in the wife's 94 Sup. One of the lines being removed is loose (no threads holding the male/female fittings together), yet the line won't separate. The fittings are definitely loose and I am able to wiggle 'em around as if they are loose, but the inside of the...

Okay guys, I searched and there's about a gajillion freakin' threads about wheels for the MKIII. I read a bajillion of 'em. F that! I am lookimg to get some 18's for my 90 - Decent fronts maybe 8.5" wide and some PHAT-@$$ rears. I have Eibach/Tokico combo... The wife got some 19's on...

Hey guys, We sent out an evite/email to everyone who's email address we have (local Supra group). We are needing for ya'll to email us at g099521@yahoo.com and give us your name/mailing address. For some reason, the invitations we mail to the forum usernames and locations don't appear...

FYI.... Here's the link to the Aristo's body plug pinout I was working on. Note that it actually consists of 4 different plugs in one larger one (Thanx for the info Arnout). http://www.geocities.com/g099521/MKIII/2JZ_SWAP/pinout_test.xls I suggest you print it off and make/label your...

I replaced the 1-wire sensor on the 2J (Aristo), with the Autometer sender. I wanna make sure that it's okay to do that and that the original sender/sensor did not provide some signal to the ECU or whatnot... Hopefully it's JUST used for the guage. Can anyone confirm for sure? I did search...

I've looked and searched, but nothing concrete. Anyone out there with a 2JZ/auto (I'm using an Ariston set), in an MKIII? Mapped out the wiring?? I'm gonna be finishing up my swap this coming weekend and would really like to just compare what I've done, with a known-good running...

I am finishing up on my wire-mapping tonight (wiring up tomorrow) and have not seen anything too-comprehensive about making the wire connections for the 2JZ auto tranny. I am using what I know and think it's going to be fine, but if anyone's got some resource that could help, please let me...

Cassio's already pinned out the big plug coming from the Aristo's engine harness (to the body), but we haven't got the trans info... http://ibconceptions.com/supra/2jz/2...npinout224.jpg Basically the pins marked "trans" weren't traced/needed at the time, but we know they are for tranny...

Just wanted to send out a big thanx for all of those that were able to come out to Firewater and celebrate my B-Day!! Annette struggled to be sneaky about setting it all up, so we know we missed alot of you guys. I kinda found out Friday, but still wasn't able to get to everyone. AND...

So, been asked a few times and just responded to another... so, I thought I'd show mine. Of course it will vary for everyone... some things I already had on hand or even got for free (I will list the approximate cost anyways, for someone else to consider)... 2JZ, using auto tranny: 1. 1JZ...

Okay, So I had set my PS cooler hoses up a couple of different ways, with the previous swaps. I did not necessarily think that I've made it look as clean or routed as efficiently as I'd liked, so I'd like to see what you guys have done. I am using a ~91 PS cooler (sitting above the FMIC)...

Maybe if I tickle it here.. Well, I'm gonna rub back bere... They're cellphone camera pics, but I think U get the idea....

I posted this on SF, so I'm sure to get some flamage there... anyways, thought ya'll would enjoy.... ****************************************** Ya know, since I am an official Project Manager (yet my MKIII projects are out of control), I thought I'd share my preliminary/draft MS Project...