Search results

1. 7MGTE complete : Currently running, no smoke, w/Mobile 1 Synthetic - (video being made of it running). It will be available in a couple of weeks. Engine Harness is ~4 month old auto (89+) - ~$400 3” Ebay elbow and downpipe (shiny) - $130, plus another $30 to have the flanges machined...

I think I may need one, since I can't find it in my stash. Dunno which side I do have for sure tho, so I may take both if anyone's got 'em. It'd be the aluminum brackets that the motor mounts go on. I can pay to borrow 'em 'til I finish diggin' thru my stuff or buy 'em outright. I have a...

Anyone got one in their MKIII? Tips, tricks, gotchas? There are some basic differences, so I'd like to prepare for 'em.. like the rear speed sensors on an MKIV/Aristo (each wheel has one). The MKIII only has 1 speed sensor that uses the average speed of rear wheels. Also, the driveshafts...

Due to my recent bout with bleeding the brake system more often than I drive the car... and still not getting good results. I've decided to get some speed bleeders. In some cases, they actually give the application for which the bleeders will work, but in many others they simply state...

'kay, Troubleshooting my code 11 issue and also for my low/spongy brake pedal and found this hose, but can't find what it goes to... Looks like it's attached beneath (red arrow) the steering column (green line)... Comes up towards the brake booster (blue arrow)...WTF!?!?:icon_mad: The...

Hey guys, Well... After bleeding my brakes a kajillion times, I still have the spongy brake feel. So, I remembered that one of my seals in one of my calipers was not looking so hot. Probably not the issue, but it's probably time to rebuild my claipers and get rid of the rotting rubber in...

I could've sworn I started a thread about this, but can't seem to find it now. Problem, On hot days (~80), after driving for awhile, my car won't start. I'll stop at the gas station or whatever (after driving just fine)... car won't start 'til it's cooled off a bit (15-20 minutes). Real...

Okay, so I never play this game, but I guess I need to. I'll have to include a pic later, but here goes.... On the engine harness, where it comes to the firewall, almost behind the intake cam cover.... There is a white 2-wire connector that has a yellow/blue wire and a white one(w/brown...

Okay, so went to get the alignment done today and the driver's side tie-rod was siezed and ended up popping off of the knuckle. So, I basically need to replace the inner and outer tie-rod on that side. I have an inner tie-rod from an '88T... is it interchange-able with my 90T? Are they...

Okay guys, I dunno when, but I will make some time to do some write-ups for all the common stuff we do.... Removing the dash, replacing a clutch, engine swaps, timing belt, plugs... whatever! I have a bunch of experience doing it, but not alot of pics. I am volunteering to put some...

Okay.... in a nutshell... We have a black 2000 Mitsu Galant, black 94 Supra, and a black Mica 90 MKIII. I am getting ready to repaint (maybe myself), the Galant and the MKIII. The black Mica looks okay and you can only tell when you get up close, that it has that "redness" in it. I...

Can be deleted.

So I got the car inspected and registered, so I figured it'd be okay to install my clear rear sdiemarkers and front turn signals.... Easy job, finished late last nite, but when I go to start the car this AM.... just cranks no-start. I check the power at the fuel pump relay and there is...

I've got this common issue (I had it in my previous Supras anyways). The windows rattle from side-to-side. The felt pad (or whatever) is wore out and the metal behind it, scratches your tint/window.... You can see the path I outlined in the 1st pic and the wore out spot, where the metal...

Okay, so we've all swapped out our stock wiper blades (not the refills, but the holder itself)... I got a few ANCO wiper blades to match the ones we got for the GF's MKIV... 18, 19, and 20 inch... That way, when we buy refills, we both get a new set, since refills come in pairs. So...

'kay, so I searched and still have the issue. After replacing the dash, front body, and engine harnesses (new), I still have no action on the cluster. I checked the fuse, swapped rheostats, etc, etc. I plugged the cluster in and turned the car on... The temp needle moved... down. Never cam...

Looking for pics of where the tranny kickdown cable runs, as well as the throttle and cruise cables (to the throttle body). Sorry, dunno much about this auto nonsense and don't have sumthin' to compare to. TIA, E

Scenario... Old engine was a JDM (TB only had 1 nipple, etc). Replacement engine came from a 5-speed, throttle body has no place for kickdown cable. JDM throttle body had no place for it either. Looks like they ran the car with it unattached...? :3d_frown: What problems would that...

I searched and could not find anything. Anyways, it's been awhile since I got anything 7M and need a lil' help, so that I can have everything on hand when I go to install it tomorrow... Toyota won't be open, so I need to know the specs to give the auto store guys... 1. Battery cable (pos) -...

Okay, I searched and haven't found much... I didn't find an audio section, so I just posted to the General section. I had a Sony 45wx4 sytem in my 87T (4-speaker system) and it sounded great. I am about to try this again with my 90T, but found the last time that it all sounded like sh*t...