Search results

Nice deductive work. Most people just keep replacing parts till they A) get lucky, or B) run out of money and sell it. Never heard of that issue before, either. And PS- Thank you for posting your remedy. MANY people begin threads, where possible causes and solutions are tossed around by...

Didn't get time to do much today. Helped a friend redo all his calipers/rotors/pads on a subaru. All I got done was a quick trip to Pull-a-Part to grab a fueltank shield, and paint it with bed liner. Mine had a busted mount. Tomorrow, I will get some CO2, and finish welding the tire well.

Hey Pi- What is the significance of the extra two wires in my pigtail?

Well, it's ok. I was trying to get by using argon on mild steel, and it was causing crappy welds. At least this forces me to get some proper CO2 or Co2 mix.

So you're talking about the actual plug that's hanging off the back of the ecu, and not a socket in which to install a plug, correct? I see the same pinouts on my diagram, but looking at my ecu, I actually have 5 wires/ pins in that plug...wierd...

Cut out my spare tire well, and tacked in a replacement.

Thanks. Got around to cutting out the original today. I marked about 1.5 inches lower on each and cut at that point. At this point, the new one is in, and tacked every two inches. Problem is, I ran out of shielding gas, and the store is closed till monday, so...

I think you're ok running the temp sensor where you want to a certain extent, but I don't think you want the pressure sensor on the front side of the throttle plate.

FINALLY, a Supra hits the pull-a-part. It was an '87 maroon na/auto with a grey interior. Amazingly original car, too. Had all the factory parts, from the air filter and under belly pan, to the bolt-on chrome exhaust tips on the Futaba muffler. Now, I've got to do some more...

How do you have the reference lines plumbed?

Wish i had kept it too. My NA had the resevoir, but no pump.

Not much going on here. I've been out of town for the past few days. Just decided on a place for my vac resevoir, and mounted it: This will be used to assure proper vac pressure to the cruise control and HVAC valve. The car was originally na, so it doesn't have the wiring to run the...

Nah, i think i'm good at 2,999. Doh! Damnit!

We'll have to see. I'm thinking about going up to Gainesville and cutting one out from the teal '92 that i got the front bumper from. Apparently, it's still there, a year later.

Here's my experience with it, with pics. http://www.supramania.com/forums/showthread.php?145524-Installed-evo-injectors-today

He said he had no codes. But i agree that afr is more likely the issue, especially if the power just subsides, rather than becomes a jerking or shaking. You didn't mention the mileage of the motor. Has the filter or pump ever been replaced under your ownership?

That happens to most Supras eventually.

Would love to see them, as well as an approximate cost for the project.

Then you and I both need to find shells!

Im sorry that i cant give you an answer. But wanted to ask: are you recovering the seats? If so, it'd be great if you did a little writeup w/ pics. I plan to recover mine in a couple months.