Search results

Well got word motorsports nationals is canceled.

The speedo needs to be hooked up for the auto shift to work. as for it not shifting the best way to tell is put it in 1 and try to do 40 run it up to say 5k or so then go to D you will know if it shifts then.

http://www.youtube.com/watch?v=MXW0bx_Ooq4

What were your readings for you last emissions test what were you failing on?

I always get compliment of "nice car" when my paint is bad and I still have a lot of work left. Usually followed by "what is it". Then I get every kid in him moms mini van wanting to race me. And of course the occasional honda or acura wanting to race. But when I drive my wifes honda with...

So the fun continues with this car. As stated the headlights do not work now. I have tested at the relay and if I jumper power to the output of the headlight relay the lights work. I have three powers and one ground to the relay, two are supposed to be power the ground goes to the lights (the...

A friend of mine is going to come out and he has a friend with a 900hp mk4 and a lambo gallardo so he is supposed to bring both of those to the event.

People don't check the regional posts very often just so you know.

There is the area between the fender and fender liner. I think that is what he is talking about.

Mine has held up with no scratches peeling or anything for 4 years. Also I did coat mine with some clear so it looks like its armoralled all the time just for the hell of it.

Once I swapped my walbro into my car it never held pressure figured it was just the pump is not designed to keep pressure. I don't mind it though I never have to worry about bleeding off fuel pressure to work on it.

You may have the same problem I had, the speed sensor for shifting is in the cluster if your speedo dosen't work then it wont shift. Unplug the trans computer and manually shift and that will tell you if the trans is mechanically able to shift.

Yea but were gonna make you park as far from the supras as possible, jk :icon_lol:. Its a fast friday so there will be lots of other cars there too. Its not a supra exclusive event.

No he means the control valve that is in the upper part of the rack. It controls fluid going to help pressurize the left or right side of the rack to assist in steering. The flow control valve in the pump should make a difference turning either way ie not enough pressure will make turning hard...

Check for power in the fuse panel to the am1 am2 alt and main fuses. See if you have power on any of them.

Just wanted to inform people in the area of the fall supra meet in case you have not been around the regional forums lately. It's at Atlanta Dragway in Commerce,GA. Here is the main discussion thread. Just trying to get as many people as we can there...

You going to the fall meet?

Howdy

Alright I made a mk3 model for use in the garmin its converted to use, I don't know how you add it to the device or anything but it is converted for use. If anyone is interested PM me and I can email it to you. Here are some gifs I made that show what the rotation should look like on the garmin.

I will be there and my wife also. Her car will be there and she will most likely be racing as long as we can give her enough encouragement. I wont be able to get my car out there unless someone has a welder that is willing to come out and let me use it for a little while to get some stuff...