Search results

If you have not checked into prices on fuel control you might want to it might surprise you. I am about to get all the electronics for my wifes car and were looking at just over $2000 just for all the sensors and controllers an aem ems will run you $1700 by itself if you go that route. Just...

I don't think the 200+ degree coolant is gonna lower your oil temps too much.

I know the ma70 na tach wont work with the 1jz without changing the resistors but the turbo tach should work fine just hook it up. here is the tach conversion link. http://www.4cefed.com/tech/natachchanges.jpg

The blue box under the dash is the retainer retractor relay, it can make your headlights not come on but it should not affect your dash or other lights. The retainer retractor relay makes you headlights come up and stay up and makes them go down along with making the head lights light up. I...

Yea sorry John, I ended up posting the date in my for sale thread instead of here in the clean out thread.

Oops I guess I forgot to put the date on this forum I though I did, but we are going to do it Sunday May 1st this coming Sunday. We are not getting the dumpster after all. Got a deal worked out with someone to dump the stuff. Let me know if you are interested in coming out.

Well it was a bad progress but first off I had bad valve stem seals, I replaced them with cometic ones and it got a lot worse, but the cometic ones didnt seem to fit very well. So put some felpro ones on there and no more smoke, but after driving 100 miles very hard, I blew the seal in the...

I am figuring we can do a swap meet if ppl want to, bring your unneeded parts and swap with other people. I will make burgers and hot dogs and have drinks, byob though. Also if there is anything you want to get rid of I am going to get a dumpster delivered, let me know if you are bringing...

I am cleaning out my shop again god only knows how many times I have. So I am tired of moving around all these parts I have. So I am fed up with it and going to throw away at least half of what I have. I have parted out 2 cars and have gotten parts from various places over the last 7 years...

You say new strut, are you only going to replace one, or are the others new.

is the throwout bearing attached to the pressure plate, or did you just put it on the trans and the pressure plate on the engine and put the two together?

Operator error!

Check/clean screen as mentioned, also check the hose that runs from the reservoir to the pump for kinks or bends. The hose on mine was soft and kinked and was starting to collapse.

If you want to get rid of the lines on top of the valve covers the best thing would be a belt sander. As for when I started polishing I used a random orbital sander with 220 grit then moved to 460 then 800 then wet sand with 1000 lastly hand buff with a terry cloth and mothers aluminum polish...

Well got the bearings done in my wifes car last night, wow what fun. Still wont be able to race it though till the bearings seat in. And still have to replace the power steering pump again. If anyone around has one that is in good shape and working I could use one. We are going to try to...

Atlanta raceway is opening back up in February and we are heading out there to test my wifes car and hopefully mine on March 4th. Hopefully everyone will be done with there winter mods in time to make it and we can see some supras run. Also March 27th is import face off event, we need to get...

Sorry tyler I searched a bunch for any thread relating to it but could not find anything. I was searching for threads either of someone saying they were broken down or anyone else posting about it. I still have a few friends in the towing industry if it disappears I should be able to find out...

So the story is for the last week I have driven past a white pre 89 turbo mk3 on the side of I985 in north east Georgia. As stated it has a black tag with gold or yellow writing. I think its a Louisiana tag not sure. I am just wondering why someone would leave a turbo supra on the side of the...

Very bad valve seals will cause white smoke, I just went through this. Also a bad turbo can cause it. Take the plugs out of the cyls and check to see if there wet with oil. If they are then its a good bet its valve seals. Take off the exhaust elbow and see if there is oil in the exhaust that...

Well Alan does not even know when he is leaving and I don't really have time to set anything up but Saturday Dec 4th is my bday and I am going to have people over anyways so if anyone wants to come out it should be a good time. I have to work so people can come over after 5.