Search results

This is a AZ guy not sure who though.. But this is one great looking car http://youtu.be/B7V6eMkPZIY http://youtu.be/nvvazoJR1C8 http://youtu.be/7eI8hzbj4x0

I know the Stock ECU reacts and part throttle causing lean afr's under boost on VPC/AFC setup's So my question is this a big concern or common with MAFT Pro's? I am using a Stock Toyota Head gasket so staying away from detonation is important and i wanted to know from the experienced if...

Like the title say post your exhaust Clips here. ALL comments Welcome ! Doesn't really matter what you have i'd just like to here everyone's car (i'm sure i'm not the only one) If you'd tell us a little more about you setup. I will also take any video post and try and keep them...

So today i finished my car put new turbo on and 560cc injectors from a evo 8-9 and lexus AFM with 7m Electronics But with no luck the car wouldn't start just cranks but never jumps to idle. Its is getting Fuel So then i started wiggling the wires and the car would start to jump to idle...

So i took off my intercooler today because it had some oil build up on the Hotside so i wanted to wash it out before i put my new turbo on. My question is what's the best way to go about Just take a hose to it ? My main concern is making sure to get all the water/soap out afterwords..

Hey guys i was just looking for some options to go with for a new clutch setup currently i'm Stock OEM replacement (3,000miles) Flywheel/PP/Clutch/Bearings My mods and power ill need to support 7M-GTE/R-154 Driftmotion Intercooler Kit (2.5inch piping) 3inch Turbo Back CT-26 60-1 @ 20psi Apexi...

So i am about to purchase a Tial 50mm BOV i was looking on Ebay and i wanted to know how to tell if its real or fake? Also what's the up's and downs of the Different spring rates how do you choose witch is best for you...

just curious on some opinions and experiences some of you had with shimming the wastegate good and bad ones. I know that it decreases life span of the Turbo but is it worth it? I will be running a Ct26 60-1 with a 10degree exhaust clip Stock wastegate/manifold i will be using a Manual Boost...

Hey guys so a friend of mine is picking up a spare R154 but the Metal Ring on the back of the transmission that the Driveshaft slides into is bent My question Is it hard to switch this part out? Can i use one from a W58 or A340e?

So i am going with the famous Lexus setup with my new turbo ! I am using Evo 8/9 560cc Injectors with the Lexus AFM. My question is how much power have people laid down with these and when is the Duty cycle become maxed

So me and my friend have run be for when i was stock turbo i pull about a car until he gets boost and starts walking away well the cars have changed and we plan on running soon ill make sure to get video for you guys! Let us know what you think the outcome will be and we will get a race...

So i took my turbo off yesterday and decided i should plug up the holes while it sat and i noticed a a hole that i didn't remove anything from. Its located right next to the oil drain for the Turbo and the Oil filter I have been running this way for well idk how long with out much issue...

So i just put my order in for one of Alberts Billet 58trim CT-26 rebuilds and just wanted to be able to make my Exhaust Manifold look Cleaner/Pretty for the new turbo. Is there a replacement CT-26 Exhaust Manifold ? Whats the best way to go about cleaning the stock one and can i paint it...

So the past couple days my car has been bucking and jerking while cruising so today i checked for boost leaks and vacuum leaks only to take a look at my turbo and find this. It's a stock Ct-26 and i might be crazy but the blades were not broke the last time i checked it :(...

Just wondering if the adapter fits both anyone know ? http://www.ebay.com/itm/Toyota-Supra-Turbo-87-92-MAF-Air-Intake-AEM-Air-Filter-Filters-/370571172852?hash=item5647c35bf4&item=370571172852&pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr#ht_1049wt_952...

So the car in need is a 2003 5.3l V8 Chevy Tahoe Problem is about every 15 miles the car acts like it runs out of gas and dies. I can turn it right back on and go another 200ft then does the same It idles fine and won't shut off. Oil gauge also says its loosing pressure when car is dying out...

My fan clutch started making this really bad grinding/rubbing noise that's only getting worse. Also if you look at the diagram below the shaft that goes into the back of the fan clutch seems to be a problem area as i can put my hand on the fan clutch and rotate the fan around the shaft i'm...

So does anyone know the 1-5 star crash test rating on our cars or anymodel supra ?

So I'm about to put a walbro in the car tomorrow and was wondering witch is a better mod for the fuel system. One other question. Can I bypass the stock relay and resistor safely? And just take that stuff out of the engine bay. Thanks Jordan

http://phoenix.craigslist.org/nph/ctd/2720087984.html So i found a 89 mk3 on craigslist claiming 500hp (I don't believe) But anyhow these are my questions about it. In the pictures below you can see he has 1.He has seemed to eliminate the PCV system? 2.IAC valve has also seemed to be...