Search results

ok guys i got the damn thing out! after breaking 4 ratchets, buying a extractor set (which didnt work) i ended up having a stud extractor that fit. I hooked it up with my 4 foot breaker bar with my wife holding the brakes and it came out! I did heat it up for about 30 mins with my little propane...

Thanks for the replys. I didnt think that bolt was hardened steel, that makes it even more difficult! Im wondering if i can heat it up with my propane torch? Would it hurt anything? I sprayed it with penetrating oil and its been on it for about 11 hrs or so. GrimJack- Do you still have that...

Hey guys, I used the starter method to get the harmonic balancer bolt off and guess what, it broke, lol. so, my question is has anyone experenced this before? Whats the best possible outcome? tips, tricks, tools needed to extract that bolt?

Hello, Im going to replace me front main and oil pump driveshaft seal here in a couple weeks and this is what im buying. 1.90311-52003 seal, fm list 90080-31022 seal, op drive list 11312-42010 gasket,cover rh list 11313-42020 gasket,cover lh list 16124-42020 gasket, water pump list...

ok guys i changed the camshaft seals, valve cover gaskets, and cps o ring with still not fixing the oil leak. I took the camshaft sproket cover off to see my timing belt to have oil on it. With that said, with those seals and gaskets changed its leaking from the little 'weep' hole on the bottom...

this is a picture of kinda where its coming from. took off the timing cover (plastic thing) and couldnt tell where it was leaking. Possible its leaking behind the metal plate behind the cam gears coming from the cam seals? my water pump also has oil on it. My thought is the revulutions of...

That oil pump driveshaft leak would suck to replace! Any other ideas? Im going to take off my intercooler pipes, my turbo hose (the one that connects to the afm) and my strut bar and just look. Its driving me crazy!!!

There is no oil leaking from the cam positiong sensor houseing. Turbo feed/drain i rule out because its driping from the front. I did pull off the timing case and looked ay my cam seals. And where are these gaskets for the lower rear timing cover? It seems to be coming from the middle of the...

hello fellow supramania members! I have been chasing a oil leak near the front of my engine now for about 2 weeks. It leaks about the diameter of a coffee can on the cement. I checked my valve cover gaskets, my cam seals, my oil filter, I have a very small leak from my oil cooler lines, (very...

that would be perfect. How much does he want? and could i get it today?

at idle it outputs 11.85 vdc with my lights on. i give it some throttle and it goes back to around 14. normal? my lights dim when i slow to a stop also. any input?

ok. Thanks for clearing that up.

Appreciate it! now, does anyone have one for sale now? lexus afm with a working black box would be perfect!

I deffinently want to go to MI2K11! What do you think the price will be for the dyno? any metro detroit members have a spare working 7mgte afm? Im getting code 31 and it tested bad IAW TSRM... :( text is good. 907-351-0794.

So im getting the code 31. Im searching for a used good one in spec with the tsrm. If i just buy the shell with no little black box on top is that sufficent? Or does the little black box on top of the afm go bad as well?

I bought part of the passenger side rear fender from 'CrazySupra' on the forums (real nice guy to deal with) which included part of the inner fender. My question is is it possible to remove the outer skin from the inner fender well? I would not like to replace part of the inner fender well, just...

Mine was doing that and i discovered my wastegate hose had a hole burned into it. The cold weather could also do this. Did your car start doing this all of a sudden?

pm me if u sell that intercooler/hardpipe kit.

doing the same, what a waist. :( 1) Davismj711 2) WaT_ThE_SmeLL 3) reydio 4) 5) supraslick 6) toyotanos 7) iherduliekme 8) shaeff 9) Enraged 10) 11) Toink 12) the t3d 13) 14) 15) Chambers 16) jdmk3_87t 17)pearlwhite87 18)freemoneey 19) 20) 21) 22) 23) 24) 25)

Im loving those wheels! Exactly what i was looking for mine! Im liking the oil cooler too, although in detroit it wouldnt hold up well. Ha.