Search results

I split my subie in half on a light pole, VDO gauges the only survivors other than me.:aigo:

I thought my parts car was bad, and that sat in a cow pasture for 10 years!

I had a set of VDO gauges on the WRX I used to have, would match perfectly, black background green lighting with red/orange needle. When I install gauges I will either get a set of VDO or autometer GS series gauges.

I have a 87 supra without ABS that I am rebuilding and seems like the brake master cyl. is blown. My question is will a master cylinder from a 87 supra with ABS work? They both have the same dimensions and same 2 outlet ports and will bolt right up, but they look different. I dont know if they...

Im nearing completion of a NA-T conversion and I dont know where the 3 HAC sensor wires go. Can anyone find me a picture of the HAC sensor connector so that I know wich terminals the HAC sensor wires plug into. Thanks.

You cant repin, grey connectors have different terminals than the yellow. as long as you use sealed connectors when splicing or use heat shrink when soldering it is as good as new.

Thanks for the info guys. It sounds like this may be just what I want, but from what I understand its not stainless? Im really trying to find a stainless system like this because I know how fast normal steel exhaust rusts and I dont want to buy a new catback every 2 years.

Sweet. Thats really good to know. Thanks.

If it were me, I would splice the yellow connectors onto the grey connector harness. I pretty much just did that with my swap. But I have alot of experience with that. Dunno if you do.

Anyone running this exhaust? I have never heard of it so it must not be very popular? I like it because it comes with a dual exhaust tip. anyone have some input? http://www.horsepowerfreaks.com/partdetails/HKS/Exhaust/Exhaust_Systems/Turbo/1232

I am in the middle of a 7mgte swap and I rewired the ge harness to work with the gte. I have everything squared away except for one circuit. Im not sure what the TIL (Turbo Indicator Light) pin on the ecu is really for. anyone have any insight on this? the ecu is a 87 I believe.

I actually found exactly what I need in the alldata database. tells me what every terminal on the ecu is for and now I can wire my harness accordingly. I wish I could post up the diagram but I dont have a scanner handy and the page is not linkable.

I am currently swaping in a JDM 7mgte into a 87 supra NA. The gte came with a harness and no ecu. The car had a blown engine and the old owner gathered a gte ecu to do a gte swap but never got it done. My question is the harness that came with the JDM gte engine has different ecu connectors...

HI. This is my first post on this forum. After wanting to get a supra for quite some time I came across 2 different supras really cheap 87 Targa N/A 5speed Maroon exterior/Maroon interior *Free* Car is pretty rough and has been sitting for 5 years under a car port Engine is out and the...