T

toolmaster

New Member From pierce county
Messages
6
Reaction score
0
Points
0
Joined
Last seen

Profile posts Latest activity Postings About

  • T
    well we took it to turbo technologies in tacoma. they tuned it and also found a bad coil now it pulls 246hp at the rear wheels and 276 ft lbs of torque, with 7.5 lbs of boost.. but now the clutch is making a rattling noise even though it is a high perf clutch master setup... ugh this thing has turned out to be too much work! but what do you do now but keep plugging along till you are done with it!!!
    J
    toolmaster - apologies, I just saw your message. Do you still need help? What's your fuel pressure? A controller is recommended
    T
    I need a tuner with dyno, any shops out there in tacoma, puget sound area with this type of experience?? i have an 88 supra n/a - t swap, that runs lean and we have tried everything except a new ecu!
    T
    i have an 88 supra i am working on, it was a N/A and my son wanted a turbo so he did the research and we installed a t3/4 turbo with a 50mm wastegate and dbov and stock turbo ecu also the stock turbo wire harness. we installed 550 injectors and 3" downpipe. we have gotten it running but it runs very lean. how do we get it to run richer we boosted the fuel pressure with an adj fuel pressure regulator. but we had to run up to 50psi before we got any results. i have been reading posts but still not sure what to do. any help would be nice? a add on ecu?? or something? when the boost hits it falls on its face...
  • Loading…
  • Loading…
  • Loading…
Top Bottom