Recent content by Oxedizer

So managed to get get into the workshop this morning for a few hours to find a boost leak, nice being a Refrigeration Engineer, as I have access to certain equipment. I used a small liquid line refrigeration drier to form a plug/bung with 1/4" fitting and then clamped it down...

Yea, sure thing, I was going to remove the 57mm Hose (where the bov is located) and put the bung in there, and then pressurize from the coldside of the turbo. Matt.

Ok, I will get the nitrogen and make sure that my system is holding... I am going to test from the hose coming from the turbo that leads to intercooler, then back too 3000 pipe. I will update everyone with results. Matt.

Thanks for the replys so far guys. Results: (CPS testing) G1 - G- 142ohms G2 - G- 164ohms NE - G- 162ohms Air Gap - 0.3mm Re-calibrated TPS... But was in spec, checked timing with TE1 & E1 bridged (warm car) 10* BTDC Matt.

Wouldn't it be present all the time if it was a boost leak issue? The car will pull to 140mhp from a stand still with the boost gauge pinned at 10 p.s.i Said gauge: Matt.

Hey all, Sorry to drag up an old thread, but I'm having problems again! The original engine that was in the car suffered of rod knock a few weeks later, anyway another engine was sourced and installed, this came from a JDM 89 Manual Turbo. During the install process I had replaced most stock...

Pity about the crap music.

Remember there are two types of Compressor surge... Rotational stall: Is what you have... which is nothing to worry about. It's not doing any damage at, and sounds good. Axi-symmetric stall: Very bad, this is when the turbo is pushing too much into the intake with out it being used. This...

Youtube link Love it. :icon_bigg Matt.

The 7m... :naughty: Matt.

Typically: needs re-gassing. more than likely some of your seals have gone bad too. Has the system ever worked? or is this just a recent occurrence? Matt.

Ah balls, Sorry bud, I should have noticed this was was in "Other engine tech" Matt.

Matt.

Nice one. Pay for what you get. An average exhaust overall. Matt.

Hey guys, What are your thoughts on this exhaust, I have priced up various systems. To me this system being complete is the most worth while. Anyway what are your thoughts? ebay link Matt.