interesting concept. sounds like to me it will work with a pump and correct injector. but then on the tuning side im not sure if you could control one injector separate that the other injector's duty cycle. maybe speak to tuning shop first to see if it possible
been searching around and i havent found anyone using the greddy toggle switch between programmed maps. is this feature not worth it?
i was wondering because i wanted to use a specific toggle switch for this switch panel im making. does anyone know how to wire it in? i know its a basic 3.5...
i was reading through the pinout for the emu and it says to cut air flow sensor wire to ecu and attach it to the white wire and then attach the green wire to the ecu end that was cut.
-------------------------------------edit-------------------------------------------
opps i guess i ment to...
I'm finding it hard to believe that the 7m resistor pack won't work. All its purpose is, is to restric current down to 3 or 5 ohms so u won't fry the ecu. But the 7m resistor pack has 3 outputs right, so two cylinders fire @ the same time. And the 2jz has 6 outputs, does this mean that the 2jz...
nope def. not in the loom because i took every piece of electrical tape off.
is there a pic of the 7m noise filter?
---------- Post added at 11:29 PM ---------- Previous post was at 11:28 PM ----------
oh just saw the pic now. k thanks man!
im doing the wire harness for my 88 supra 2jz and i came across the igniter pack wiring. as the 12+ feeds each coil it goes to to a noise filter and then grounded.
i didnt get a noise filter in my harness but i was wondering what would happen if i didnt include it.
wiring schematics are...
okay so i found this diagram a while back before i started my project and it showed how to wire a 7m resistor pack into a 2jz harness for the injectors.
now that im at that stage i lost it! can anyone point me to a link? i already tried searching and even on google but i dont think im using the...
that looks like the vsv for the sequential turbo set-up. but all those hoses looks like someone already bypassed the sequential set-up. are you running the twins in parallel now?
i dont like bringing back old threads from the dead but im looking for the aristo body plug pin-out.
this is the link from the first page: http://www.geocities.com/g099521/MKI...inout_test.xls
but that too is also dead. anybody have a new link?
thanks
i finished the boost controller panel for my car. i was thinking of adding some idiot lights to the bottom of it. like the 2jz has low oil pressure or low oil level warning light so ill add that to there. and a light for the fuel pump and things like that
Oh yeah that is the progress picture. I should have posted the newer one I took. I bought 100' of that p.e.t. techflex to do the wire harness and other misc. Wires like these ones. My plan is to have everything looking clean and safe ;)
okay so last year i dropped usdm 7mgte into my 88 non turbo. had some problems with cooling and other leaks, now ive got the worlds biggest boost leak and a warped head (compression test shows 150psi first two and last two cylinders, middle two are 120psi)
so now i learnt my lesson about doing...
hey did u end up getting the controller? by accidence i bought the temperature sender for that kit instead of a set temperature switch. so im interested in this controller now.
yeah my neighbors did the same thing to me when i was building a shed. went to a public city heiring and then payed like $300. then when i went to go do my engine swap, not a peep! lol. hope you can find a shop to work on it. maybe ask around local mechanics if they have a empty bay you can rent out
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.