Search results

Hi guys trying to keep this as brief and as informative as possible. The issue: Boost drop at high rpms. ~16psi down to ~11psi ...also worth mentioning it only makes 11psi max in 1st gear and 13 (also drops to 11) in 2nd. 3rd is where it will hit 16psi and then drop at around 5000+rpm...

Have done some searching and reading but I'm still scratching my head. Hope this is not a terribly silly question but... When does the factory oil system start to reach its limits? I have a mildy built 7M (rebuilt head, probes, eagle rods, new bearings etc) but I did not shim my new oil pump...

Having a real hard time working this out! Hoping you guys can point me in the right direction. Installed the 550's (precision injectors), Adjustable FPR and a Walbro 255. Dropped in the 550cc chip for the HKS FCON. Adjusted the base fuel pressure as per TSRM at 35 psi. Cranked it and it ran for...

I installed an unclipped 57 trim on my built 7M (probes, mhg, arps, recod head etc) a few months ago, and i've been putting off asking these questions but something doesn't seem right. Firstly, IIRC people have said that the 57 trim spools just as quick as a stock ct26. Is this true? For...

Dropped a built 7M in not long ago. Typical build: reconditioned head Probe .20 over forged pistons Eagle rods Polished crank Block and head machined Cometic 1.3mm head gasket Now the issue is it seems to lack power. It felt quite a bit quicker with the tired old motor! It had code 51...

Hi guys, Just recently installed my built 7M, and can't seem to work out this problem. My Blitz DD bov was working perfectly before with a recirculating fitting, but now with the new motor it will not vent. Im getting compressor surge/flutter or whatever you want to call it. I have...

A few mates and I have discussed this numerous times. Basically what's better for the CT26. Are there any proven results that one is better than the other, and if so would the difference be noticeable? I myself don't really care, I run a recirculating ddp but just for argument sake I wanna...

Hey guys, I believe that the rear coolant pipe is leaking on my car. I replaced every coolant hose there is, back there and its still leaking which leads me to believe its the hardpipe. I can't see behind the motor well enough to confirm it 100% but if it is the problem what are my options? It...

Im looking at getting the new DM intercooler kit which has the inlet and outlets on the same side. Which seems a lot nicer than the older kit. I've looked through a bunch of threads about the driftmotion kits, and haven't really got the answer I was looking for. So to all the guys who run a...

http://www.youtube.com/watch?v=0f3tmHx3TI4

http://www.youtube.com/watch?v=hffN5xfwyZU&list=FL4-O3md8bI1DKDhpr0VZ_Yg&index=4&feature=plpp_video There's a drag MA70 Supra at 1:00 :)

apologies for crappy iPhone videos....may have to turn your volume up too :icon_bigg http://www.youtube.com/watch?v=rgqnt0xZfK0http://www.youtube.com/watch?v=l1q5DVtUTyghttp://www.youtube.com/watch?v=S83o_umWErc

Hey everyone, After installing a large front mount intercooler I have been having some troubles. :3d_frown: The car hiccups or misfires now and then during acceleration and decelerating. Although it seems to happen more when im giving it 50-80% throttle and in the higher gears like 4th and...

Hey fellow supra lovers, Does anybody know where these indicator covers are sold? Ive had a fair search with no luck. :icon_mad: To the owner of this supra: nice car! Cheers

Hey peoples, Ive got a relatively stock 7M-GTE, my mods are in my sig. I just purchased a large front mount intercooler with 3" piping and ive been told that the piping is too large, making my turbo work harder due to less pressure in the intake manifold. I just want to know more about this...

Just made a quick video of my setup. Will get a 3" high flow cat in the near future. :icon_bigg It doesn't sound too healthy, blowing a bit of smoke...I gotta check a few things....any ideas are welcome. :icon_razz http://www.youtube.com/watch?v=LuKt6FKcMcQ Mikael

Hey peoples, I have had an oil leak in the spark plug valley and recently swapped the centre valley gasket with four o-rings on the 14mm hex bolts...didnt see a point in spending $100AU for that piece of whatever it is....:icon_bigg Ive managed to stop the oil leak from there BUT there is...

before my bhg.... :( I saw a VW GT (1.4 litre supercharged and turbocharged - approx 125kw) pacing me on the way to the shops so decided to give him a run. From the lights we took of normal and then we both hit it from bout 10kph in first gear and i pulled him by about 1.5 car lengths. Now...

OK so ive definately got a BHG now (huge amount of white smoke and heaps of cappucino), and I want to drive it to a mechanic which is about 30-40 kms away. Is that gonna ruin my motor. I figured ill keep filling the radiator with some water along the way so it doesnt overheat... Is this a...

Hi Peoples, Purchased a MA70 Supra a couple of months ago, and thought it was about time posted a few details and pics of it! :icon_bigg Some Details Engine: Stock 7M (and HG :nono:) Custom Divorced and Recirculating Downpipe Full 3" Kakimoto Exhaust with standard cat K&N Intake Boost...