Search results

I'm going Aem v2 ems on my 7mgte and id ike to do a trigger wheel set up similar to what dwane has on his white mk3. Does anyone of our venders/ members offer a bracket or kit for such a set up? Thanks

i have a PT67 DBB and would like to know what size oil feed and return line is recomended. also if a oil restrictor is needed, i doubt it as i use VR-1 20w-50 and pressures are good.

can injectors be damaged due to a starvation of fuel? say u had an incorrect micron fuel filter before your fuel pump the pump was screaming loud trying to work hard to get the fuel past this dumb filter, engine ran but very poorly (really lean obviously). could this cause pre-mature...

the autozone(s) in central jersey do not carry the german castrol oil. other then those stores who else is known to have it? i found this site through google search but i dont know if it is reputable. http://matrixsyntheticoils.com/store/euro_super_savers_corner_german_castrol.html#402...

this unit was offered to me rather cheap. im currently running a MAFT gen 1. i know the greddy can do timing but is it compatable to run both piggybacks? ie use the MAFT just for its sensor and use the greddy for fuel, timing, etc. which one needs to be wired closer to the ECU? is it even...

we all know their were countless issues with these. i spoke to Tom at TLF performance which is who i baught them off of over a year ago. he said he will take them back, flow test them, and if any are off of the 550cc rating then he will take other injectors from his stock and match them up until...

http://videos.streetfire.net/video/S...ler_635154.htm

Ross pistons crower rods ARP head studs HKS MHG big front mount intercooler 2.5" alum piping 3" turbo back exhaust AFPR removed J tube 550's walbro 255 ADJ cam gears aftermarket intake Maft translater (gen 1) here are my ?s 1) my ct is leaking oil into the compressor...

few things going on with the motor now. 1)wont hold fuel pressure via a gauge on the FPR. walbro 255 i can hear it come on only durring cranking not with key "on". i get pressure while cranking but will drop off to 0 after cranking. lines are SS from FPR to rail, rail to FPR and SS down to...

i already have the MAFT gen 1 installed and im going to stack piggy backs with the addition to a APEXI NEO. i already know to install the NEO in between the GM sensor and the MAFT box (thanks Billy) now im just trying to figure out the pin outs to get this thing going. im looking here for my...

im currently running a Maft gen 1 on my 7mgte but with plans of a GT35R and 264 cams in my future i deff need to install my Apexi NEO or other???. im wondering how many ppl are running these 2 piggy backs w/ the stock ECU. are you able to get a good tune out of this or shoul i be looking into a...

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=250299326162 been looking at some parts for my 7mgte and came across this. now i dont usually shop on e-gay for obvious reasons but what do you guys think of these? also is there another TB upgrade that...

still no time to get her on a dyno so ill let the vets on here give me some est. 89 7mgte/R154 full rebuild bottom end-stock full rebuild head -port and polished -new valve springs -Arp studs -HKS 2mm -550s -no j tube -AFPR/SS lines -walbro 255 -2.5" intercooler piping...

looking for a good electric fan controller. must be able to control 2 fans, be adjustable, read in Fahrenheit, have a digital water temp display, and be a box style not a 52mm gauge. let me know what you guys are using. thanks

search is a mess on here. can someone give me a link to a 264 drop in cam (no shims, upgraded valves ect) that is available now for the 7mgte? much appreciated.

gettin to that point where i would like to find a dyno/tuning shop in NJ. im in cenral jersey and the car will be towed to the shop so something in the 1hr radius of me. would like to find someone on here who has gotten there 7mgte dynoed and tuned at a shop, price they paid, what setup your...

i also made this thread on cs.com but maybe some of you guys can help me out. pretty much just wondering where these plugs go and what they are. remember this in in an 83' supra so ignore the plugs that are on the body. thanks 1983 supra--->89' 7mgte swap there are going to be alot of...

ive been looking around, searching both supramania, supraforums, and celicasupra for everyones opinions on what i should run. currently im swapping a 89' 7mgte/R154 into my 83' supra. the swap is coming along nicely and it looks awesome. as i learn more about the motor i start to change my set...

whats up everyone. since im far enough in the 7mgte swap into my 83' supra i figured id join up and get some ?s answered from you guys. my home is still celicasupra.com but ill be going back and forth between the two with motor ?s and such. thanks for having me. look foward to being here and...