i just finished the motor buildup/swap with my new 89t and have been driving it for 3 days with no probs except for a small oil leak from the turbo. its hard to check the oil level being that the oil is new and basically clear so when i checked it yesterday, it seemed a bit low so i added about a quart or so. after driving from autozone i noticed by oil pressure went from 20 to 0. i immediately shut the car off and coasted to a parking spot. my timing belt was covered in oil as well as the timing gears. i didnt notice any oil coming from the cam seals so i figured its the front main.
is it possible to blow the main seal because of too much oil?
is it possible to blow the main seal because of too much oil?
