cruisnhard;1004589 said:I personally would just shim the oil pump a little. If you use a factory stud it will be the weak point in the build. Obviously you are going for higher power then stock and you do not want a failure. Good luck and hope this helps. By the way just look up shimming the oil pump in the forums here.
cruisnhard;1004589 said:I personally would just shim the oil pump a little. If you use a factory stud it will be the weak point in the build. Obviously you are going for higher power then stock and you do not want a failure. Good luck and hope this helps. By the way just look up shimming the oil pump in the forums here.