I picked this up at the wrecking yard the other day, its almost idendical to a B&M stacked plate cooler and measures 11X11
which should barely fit with my new intercooler location.
This is the only concern I have with it.
The ports are quite a bit smaller than the 1/2 inch lines I will be running but the cooling capacity should be more than enough.
Im debating on wether I can just live with this as it saves me $70. Or will it cause problems having ports that small???
Any input would be greatly appreciated here. Good enough or spring for the B&M ...66 8.5X11 cooler???
Also is there a standard thread for an egt bung? I plan on running and oldschool hks egt in the future, if I can find one. For right now I was going to weld the bung in and cap it off as I am getting my exhaust manifold ceramic coated and dont want to have to grind and weld it after its coated. In the event I cant find an oldschool hks, or I change my mind I wanted to know if different brands use different threads on their probes?
which should barely fit with my new intercooler location.
![p821026_1.jpg](https://www.supramania.com/images/pb_archive/p821026_1.jpg)
![p821026_2.jpg](https://www.supramania.com/images/pb_archive/p821026_2.jpg)
This is the only concern I have with it.
![p821026_3.jpg](https://www.supramania.com/images/pb_archive/p821026_3.jpg)
![p821026_4.jpg](https://www.supramania.com/images/pb_archive/p821026_4.jpg)
The ports are quite a bit smaller than the 1/2 inch lines I will be running but the cooling capacity should be more than enough.
Im debating on wether I can just live with this as it saves me $70. Or will it cause problems having ports that small???
Any input would be greatly appreciated here. Good enough or spring for the B&M ...66 8.5X11 cooler???
Also is there a standard thread for an egt bung? I plan on running and oldschool hks egt in the future, if I can find one. For right now I was going to weld the bung in and cap it off as I am getting my exhaust manifold ceramic coated and dont want to have to grind and weld it after its coated. In the event I cant find an oldschool hks, or I change my mind I wanted to know if different brands use different threads on their probes?
Last edited: