New power!!!! 404HP 405ft lbs @ the wheels CT26 on 17.5lbs
- Thread starter Devin LeBlanc
- Start date
Thanks, Heading to work and going to throw the car up on the dyno after we get a few other cars tuned. We have 3 cars to tune today including mine so hopefully should do some better numbers.
Fuel pressure is holding now so should be good for 400 unless I run out of injector. Fuel pressure is set at 60PSI base and holding now so should have some room and need to pull fuel hopefully.
New DW300-1 pump installed.
Fuel pressure is holding now so should be good for 400 unless I run out of injector. Fuel pressure is set at 60PSI base and holding now so should have some room and need to pull fuel hopefully.
New DW300-1 pump installed.
I hate you guys and your E85... I'm literally sharing a border with NEBRASKA and we (to my knowledge) don't have even ONE station with E85 at the pump.
Nice numbers man, you'll have to update once you get the fueling issue figured out.
Nice numbers man, you'll have to update once you get the fueling issue figured out.
Fueling issue is figured out. weak wiring and not enough flow from the single walbro. New wiring installed and Deatschwerks 300lph pump installed!
Dyno'ing within a few hours
Dyno'ing within a few hours
eh idk about that. Injectors maxed timing is at 15 degree's BTDC I think Im pretty much at the threshold.
---------- Post added at 09:04 PM ---------- Previous post was at 08:50 PM ----------
Oh yeah, it doesn't hook until 85mph in 3rd gear
Got some vids my friend took out in front of the shop after we finished tuning
---------- Post added at 09:04 PM ---------- Previous post was at 08:50 PM ----------
Oh yeah, it doesn't hook until 85mph in 3rd gear
Got some vids my friend took out in front of the shop after we finished tuning
Those are some impressive numbers. Did you bypass the knock sensors just by unhooking them or what?
No if you unhook them they will set a code and retard timing. The signal is being tricked to run full timing all the time
12.1 is a little lean on e85... Stoich on e85 is like, 9.765:1, as I recall. VanDevin LeBlanc;1745360 said:
uhhhhhhhhhhhhhh no...
12.1 is still plenty safe, could pull it to 12.5 but im on a felpro HG so we left it a tad rich.
12.1 is still plenty safe, could pull it to 12.5 but im on a felpro HG so we left it a tad rich.
[video=youtube;UPvcTC6nowQ]http://www.youtube.com/watch?v=UPvcTC6nowQ[/video]
Spinning through 3rd gear with a 2psi launch off the torque converter
Spinning through 3rd gear with a 2psi launch off the torque converter
I think I'd be tearing my hair out trying to hit that magical 400HP/400ft lbs numbers :rofl:
Still, regardless of numbers, looks like fun
Still, regardless of numbers, looks like fun
yeah Ill get there, Probably going to 1000CC injectors shortly lol Then Ill be able to push 20 psi. I would love to go to a dyno jet to get a 400HP number but I don't want to pay as our shop has a dyno in it that I can use for free so its whatever lol
396hp on any Dyno with a automajic Trans using a CT26 is BIG BALLS.
manual trans do it easier. Impressive Devin.
No one wants to call that a probe. lol
You are gonna step up the game big time at the track...:1zhelp:
Great work
manual trans do it easier. Impressive Devin.
No one wants to call that a probe. lol
You are gonna step up the game big time at the track...:1zhelp:
Great work