If your looking to put 2JZ cams into your 1JZ, look at this

1jz-soarer

Soarer
Oct 14, 2010
10
0
0
31
Calgary
Dgreen78;1868534 said:
FYI, I have found cam seals to work with the 2JZ cams in 1J head. Same ID as the 2JZ and OD of the 1JZ seals. This way you only need to machine the exhaust cam journal surface and reduce a lot of work. PM me if you need the cam seal part #.

Did anybody ever get a part number?
 

525gte

New Member
Sep 19, 2011
450
0
0
hoquiam
I am not sure but I think this is the part number for the seal that was mentioned TC12549. But I can not locate it anywhere
 
Last edited:

525gte

New Member
Sep 19, 2011
450
0
0
hoquiam
I am in the process of buying s1 2j cams. I'll try to take pics and post findings on the grinding process. I also have a bearings place down the road I'll go their and see if their is a seal That will work be for we grind the ends
 

seoul4korea

New Member
Nov 6, 2008
620
0
0
San Diego, CA
www.supraforums.com
525gte;1983409 said:
I am in the process of buying s1 2j cams. I'll try to take pics and post findings on the grinding process. I also have a bearings place down the road I'll go their and see if their is a seal That will work be for we grind the ends

I just did the swap myself not too long ago actually = )
 

525gte

New Member
Sep 19, 2011
450
0
0
hoquiam
Did you you use the gsc s1 cams? I had to put this project on hold I decided to work out some chassis bugs 1st
 

Tgood

All throttle no bottle
Dec 16, 2005
206
0
16
ennis/dfw
From what I've heard the lobes on gsc cams are to wide and sit to far forward to fit in a 1jz head