Oh ok just making sure. If you needed it or something it wouldn't have been a problem.Turbo Habanero;1870296 said:
Furious But Lazy 7M owner who gave Up.
- Thread starter Turbo Habanero
- Start date
So today i'm helping a friend install a AVC-R into his 1JZ MA70 and have a question for you guys
I've found every wire on the harness side but the tps or throttle signal wire.
Here is the Avcr wires
Red (power)
purple (rpm or injector signal)
Green (ground closest to ecu)
Black (ground farthest from ecu)
Gray (throttle)
White (speed signal)
and the two links Andy provided in his JZ swap guide
http://www.supramania.com/forums/showthread.php?43888-**How-to-wire-a-soarer-1JZ-into-MA70**
http://www.supras.nl/index.php?option=com_content&task=view&id=38&Itemid=54
I've found every wire on the harness side but the tps or throttle signal wire.
Here is the Avcr wires
Red (power)
purple (rpm or injector signal)
Green (ground closest to ecu)
Black (ground farthest from ecu)
Gray (throttle)
White (speed signal)
and the two links Andy provided in his JZ swap guide
http://www.supramania.com/forums/showthread.php?43888-**How-to-wire-a-soarer-1JZ-into-MA70**
http://www.supras.nl/index.php?option=com_content&task=view&id=38&Itemid=54
Turbo Habanero;1870575 said:
Slightly OT on your own thread, unusual.
What are your plans for the 1j swap by the way? I mean your goal.
Yes I know but I didn't want to start a whole new thread for it when I know someone like Andy can awnser this simple question in a simple second.
My goals idk really just to do it right and shoot for over 500whp
My goals idk really just to do it right and shoot for over 500whp
What JZ ECU is it?
Supra has it on pin labeled VTA on plug M in the diagram.
I will have to look up the Soarer. The pinout or it is in the thread. I'm not home, I will take a look when I get home.
Supra has it on pin labeled VTA on plug M in the diagram.
I will have to look up the Soarer. The pinout or it is in the thread. I'm not home, I will take a look when I get home.
I finished it and got it done turns out it was a safc2 when my friend Andrew arrived.
He has a jza70 harness with mines ecu
He has a jza70 harness with mines ecu
So back to my car still looking for the Oil Level Sender block off plate and can anyone tell me what goes into the OutSide of the valve cover (with oil cap) because i just have a hole no plug or rubber piece of any kind.
PCV Valve. A grommet and valve. Get the 2JZ-GE one as it is easier to make a 90 degree hose work. All JZ PCV valve grommets are the same.
Turbo Habanero;1871030 said:prep for engine bay paint.
haha dude your seriously going to paint in the APT complex?!?!?! lol you're a fucking badass!
I know its not the best but atleat its one color lol.
It temp until I can afford to buy a new shell that's to my standards.
Imo it looks worse in photos
.
.
.
.
.
It temp until I can afford to buy a new shell that's to my standards.
Imo it looks worse in photos
.
.
.
.
.
Why in the world did you do black? You just seriously killed the beauty of the car with a redone motor.