Compound 7M, first and only?

[a_sesshoumaru]

Do you have any picture of the turbo set up finished? what pressure springs did you use?

 

[sethron71]

Some HQ photos for you guys, will have the motor apart this weekend to start over!

Started off with 8psi worth of springs in both but will determine that all after I get it back together and dynoed.

Thanks,
Seth

 

[hvyman]

Damn. Very nice work.

Cant wait to see some videos.

 

[87M-GTE]

Wow. Great work Seth!
So it was a stock longblock?

Sam

 

[sethron71]

Hey Sam,
Pretty much stock long block. Just ARP's throughout and 2mm MHG.

Thanks for the compliments!
Seth

 

[Keros]

Wow Seth, that's a pretty spectacular turbo setup. I hope all goes well building a motor set that can handle it. Will you throw on a "stock" turbo system to break in the motor after the build, so that the tuning process doesn't kill the new one before it's broke in? What's your plan?

 

[sethron71]

Hey mate!
Naw no stock setup going back on this bad boy way to much work to switch it all back. It will just get a zero boost break in on a long road trip. It has a decent tune from before but it will get a 500mile break in and then go straight to the dyno for the pump tune and meth/water injection tune.

Seth

 

[Figit090]

oh my...this is awesome! Stumbled across it today after searching for info on oil pressure....SO COOL! Can't wait to see how it sounds and runs, and that graph. I don't know much about compound setups, but I did recently read about a compound kit that I think Sound Performance was developing for the 2jz that made great numbers... So I'm excited for this!

 

[pelper87t]

now this is ingenuity....i am inspired ....

 

[miss_ali_j]

I am in awe.

 

[funky_monkey58]

I saw this after you first posted it before anyone else had responded yet, I think you will have issues with it and would make better power with a big single, use a QSV and nitrous and you don't break as much shit.

Good luck with the rebuild.

 

[88mk3supra]

good luck with the rebuild Seth...beautiful motor you got there cant wait to see it all done and runnin good!

 

[sethron71]

Thanks guys!

Sean we can agree to dissagree, not the first time. Yea it will take some effort to make the setup work right but for what I want in drivability and street power. Also anyone can do what you said, this is a good chance for me to show my skills and do something no one else has.

Anyways here are the pics of the damage:

The cylinder wall has a bit of aluminum stuck up top but the dark lines on the wall are just scuffs and not even deep enough to catch your nail on.

List of parts to come in the next month:
-JE or CP .020 over
-Eagle rods
-New bearings
-Gates Timing belt
-New belts
-Custom bigger sump oil pan
-Head ported
-SIP Regrinds
-New intake manifold
-Larger IC
-New Hot pipe
-New Custom -8an fuel rail
-650cc Injectors
-Second Walbro 255 New pump wiring
-Custom fuel lines front to rear

Thanks for looking!
Seth

 

[IJ.]

Just looks like an Injector laid down Seth would have happened no matter what turbo setup was used.

 

[bmoss85]

Saw some pics of the set up on fb, beautiful work as always Seth. Can't wait for you to get that thing back up and running.

 

[sethron71]

Yea thats what I thought to, new injectors are already on the way!

Really weird though since they are a set of precision's and only have about 10K on them!

Anyways time for some bigger ones anyways!

Seth

 

[whitemike]

Glad to see it moving forward so soon. Looking forward to seeing progress!

 

[NashMan]

i am not fan a ground cams, the shims get to thick for my liking in less there welded ground cams

 

[pelper87t]

got an awesome build here bro i'm definately loving that exhaust manifold top class welds:love:

 

[Txsupra]

Would you say that it is necessary for you to route the waste gates the way that you did? Do you have any better pics of the 6 into 1 collector. Something like progress pics would be cool. My father has been a welder for around 45 years and I never get tired of looking at some sweet sweet beads....