attn: 7m ebay manifold users

[808mkiiisupra]

do any of you guys have a picture of your intercooler hot side piping down to the intercooler? i need some ideas how to route mine thanks!

 

[IJ.]

Some in my pics thread.

 

[808mkiiisupra]

man you have a welded on elbow....if i could do that i would but thanks your pictures gave me other better ideas on other stuff. btw for your ps hoses did you reuse the stock high pressure side? and is it possible to use regular hoses and clamps for the high pressure side?

 

[IJ.]

I used to use a 90 degree silicone elbow there.

I modded the HP hose to fit and no it needs to be a proper high pressure assembly clamps won't work.

 

[808mkiiisupra]

I used to use a 90 degree silicone elbow there.

I modded the HP hose to fit and no it needs to be a proper high pressure assembly clamps won't work.

yea thats what i was thinking...i guess i have to make a custom line then....

does your piping go through the sheetmetal????

 

[IJ.]

Goes out through the hole under the headlight, I made some rubber seals.

 

[wiseco7mgt]

1J whats the go with your CPS?

 

[IJ.]

That was a distributor back when it was NA/t W1seco

 

[wiseco7mgt]

fark that mustve been along time ago.lol
And just letting you know im so copying your intercooler setup, i roughly have your intercooler clone just need to build pipes.

 

[IJ.]

Yep many years ago!

No probs at all on the pipe work by all means go for it!

 

[shaeff]

that was a distributor back when it was na/t w1seco

ROFLMAO!!! That's hilarious.

 

[WhtMa71]

That was a distributor back when it was NA/t W1seco

Took me a minute..

IJ what is this? http://ij.supramania.com/more45.jpg

 

[Yblegal91t]

perfect spot for the oil filter IMO.:evil2: looks great and nice welding on the pipes. you do that yourself Ian.

edit: my filter happens to be in the same spot

 

[grimreaper]

damn those picks should be censored, supra nudity! sooo CLEAN!

 

[Poodles]

IJ wins the slight of hand trick

 

[IJ.]

ROFLMAO!!! That's hilarious.

Took me a minute..

IJ what is this? http://ij.supramania.com/more45.jpg

It was a servo driven mixture control valve I made when I was running LPG that let me use the fuel map in the MoTeC

perfect spot for the oil filter IMO.:evil2: looks great and nice welding on the pipes. you do that yourself Ian.

edit: my filter happens to be in the same spot

Yep I do 90% of my own work and just farm out the stuff I'm too lazy to do

damn those picks should be censored, supra nudity! sooo CLEAN!

It's filthy at the moment

IJ wins the slight of hand trick

Watch the eyes not around the eyes but the eyes 10,9,8,<snap> you're under Whenever you enter a political discussion you will cluck like a chicken!

 

[wiseco7mgt]

im so dumb and embarassed im going back to bed..