ADD W1 oil catch can PICS

jesse_rc1991

New Member
May 29, 2012
169
0
0
austin
Looks good. The way I was going to hook it up was hook up the 2 valve cover ports to a T fitting then to in port on the can and put the baffle side to the intake turbo side.
 

525gte

New Member
Sep 19, 2011
450
0
0
hoquiam
No it just unscrewed from the lid. I'm collecting the can and Friday will be last drain for test. I live in wet claimant it's kinda shocking
 

jesse_rc1991

New Member
May 29, 2012
169
0
0
austin
I guess I just need some pliers cause I cant grip the damn thing to unscrew from the lid with my hand. get some tomorrow at work then
 

jesse_rc1991

New Member
May 29, 2012
169
0
0
austin
Here is my setup for the add w1. I was thinking of running it by where the washer fluid fill is but im having my intercooler pipe welded still and intake pipe from DM is coming in so I didn't know if I would have space, plus I could figure out a clean way to route the intake port to the catch can that way. I also put a foam filter inside the baffling case to help the condensation hopefully.







 

525gte

New Member
Sep 19, 2011
450
0
0
hoquiam
It works pretty good I'll shoot a pic of my collection from the week. But i have no control to compare it too.
I do feel like it can benefit from some stainless mesh in it also
 

525gte

New Member
Sep 19, 2011
450
0
0
hoquiam
p1985818_1.jpg


Here is the collection from the week
That 4 trips to work and back 3 miles round trip
A 6 hour road trip all hwy and a 3 hour all hwy road trip
Seems to do well for the water I for sure think it will do better with some mesh in it
 

jesse_rc1991

New Member
May 29, 2012
169
0
0
austin
looks like some very nasty beer, but more condensation than anything. I thought steel mesh would just help with the condensation of the oil vapors not help with the water condensation?
 

525gte

New Member
Sep 19, 2011
450
0
0
hoquiam
I was thinking the mesh will help with oil separation out of the air

And leave the catch can loose it becomes very hard to unscrew after it warms up

Barley snug it
 

jesse_rc1991

New Member
May 29, 2012
169
0
0
austin
ive been weary of running mesh but that's just through reading expirences of it breaking down. what if you try rubbing some oil on the O ring like an oil filter to make removal easier
 

IJ.

Grumpy Old Man
Mar 30, 2005
38,728
0
0
62
I come from a land down under
jesse_rc1991;1985860 said:
ive been weary of running mesh but that's just through reading expirences of it breaking down. what if you try rubbing some oil on the O ring like an oil filter to make removal easier
Been running the same stainless pot scrubbers in mine for 10 years now, no issue.

Nickle antiseize on the threads will help...
 

jesse_rc1991

New Member
May 29, 2012
169
0
0
austin
525gte;1985885 said:
No oring. It's the threads. I put antiseez .
yours didnt come with an Oring to seal the lower half, iyts inside the lid? mine did. Maybe you just cant see it cause its black.

IJ.;1985888 said:
Been running the same stainless pot scrubbers in mine for 10 years now, no issue.

Nickle antiseize on the threads will help...
i guess i just wouldnt want that possibility of it happening then
 

525gte

New Member
Sep 19, 2011
450
0
0
hoquiam
The can works alot better with a some stainless mesh in it. My only complaint is the catch can is not large enough fills up rather quickly in our wet claimant