Search results

im having a hard time getting my ps to work properly. the car is a rhd mk3 chassis, 2j swapped, running is300 powersteering pump with the resi that mounts directly ontop of it. after market high pressure line. i was having issues initially and i switched the entire pump and resevoir...

the car is a mk3 with a 2j and r154 i just installed an oe 1jz flywheel and a clutchmasters 4puck unsprung, also installed the BIC poly trans mount and driveshaftshop 1pc ds. problem is that at around 2000 rpm a "wobble" develops, clutch engagement or disengagement doesnt affect it. the...

i own a rhd mk3, 2jz swapped and im looking into a turbo kit. my question is, if i were to buy an hks to4z kit for the mkiv which components would need to be modified or what wont work at all. or what kits on the market would be the best fit without hacking up manifolds and that kind of...

well i found my build thread. :biglaugh: but it is more than 766 days old haha so here is a new one couple years later.. so much has changed in the car since i started modding it. and the path has also changed quite a few times. with the car nearing its completion i figure id share the...

i need the part number for a 1jz slave cyl. thx

i have an engine from a jdm mk4 swapped into my 86.5 mk3 it feels like the second turbo is not coming on. i was wondering if anyone had a link to a vacuum diagram for a jdm 2jz without the egr system. or a suggestion... thanks

what are the specs for the widest wheel possible to fit on a mk3 (-2 degree camber max on rear, roll fenders, little bit of tire stretch) im thinking of buying wheels and saving widebody till next yr :( i still want the wheel lip sticking out and i want to get teh maximum width in there...

ok im having problems with my clutch and getting the right one sent to me. i have a 2jz and r154. what combo do i use? 2jz flywheel and 7mgte pp and disc setup? assuming the 1jz and 2jz flywheel is identical this should work right? thanks in advance, jeff

is the diameter the same? bolt pattern?

just a quick question... i was wondering if there are any differences between the w58 or the r154 transmission crossmember . thanks

my car is a 86 mk3 with a 2j on stock twins. i will be running the aem ems. i have the following supporting parts for use in my car: aem IAT aem boost control solenoid aem wideband uego full defi gauge setup (boost, water temp, oil temp, fuel press, oil press, egt) im probably...

i pulled some text off of this site http://www.brian894x4.com/Gearratiosanddiffs.html Above is typcial earlier model Toyota VIN plate, located on the engine compartment fire wall. This one is from my brother's 1986 Toyota 4X2 truck. The gear code is circled in white and is G662...

just purchased this part and installed question is .. what throttle body are you guys running that bolts up to the greddy mani. thanks

anyone have any experience with this kit? pros and cons the general price? did some searching and came up with prices from 1300 to 1700? what is more accurate what kind of power it loses efficiency around. thanks, jeff

what car is this engine generally out of? its from the year 2000 what are the ups and downs to using this engine?

hey my plans fell through about getting my supra 2j so now i have the aristo 2j will the aem pnp standalone work with the aristo 2jz harness? or are there some nasty surprises i should be ready for.. thanks, jeff

is this just a fancy luxury or is it a good idea to pick up for use with my aem ems 2jz build.

i need to know the part number for the jza70 powersteering lines. and the resevior.. these are needed when putting a 2j into a ma70 chassis correct?

hey im doing the 2j swap into my mk3 and i have the aem ems pnp unit... question is do i need a map sensor or wideband o2 sensor to run with the unit? thanks jeff

i would like to know what the ratio is for the rear end gears in my 1991 cresta 1jz model. i heard somewhere that it is aroun 3.5:1ish? any links or info is appreciated/