Search results

  1. A

    need Chris number mechanic from Dallas, TX

    Chris has a shop on Kingsley rd. near Garland, Tx. I used to have his number but I lost it and I forgot his username. It's a rod knock life for me, I need a new motor put it in the Supra. I would appreciate it if anyone could PM me or reply with his number.:1zhelp:
  2. A

    Euro Half Clear/Half Amber Turn Signals Pre 89?

    What about the bubble markers.... any body have part numbers?
  3. A

    Euro Half Clear/Half Amber Turn Signals Pre 89?

    Does any body have part number for the pre 89 euro signals?
  4. A

    Very loud belt squeal, pulley problem or belt?

    Check your harmonic balancer for play. I wish I had checked mine before it flew off :(. Tore up the fan and shroud, now it squeals everytime I start the car.
  5. A

    .

    Anymore Info. on the 2jz dizzy? Details on the mounting. also what brand are those sprakplug wires that you used? Do you have them on your website?
  6. A

    intake manifolds

    ^ yeah ACIS will be deleted. Unless your going NA-t or Forced Induced , you'll lose the response midrange. I was also contemplating swapping the upper manifold (1/2NA-t), but the TPS will face the wrong way, also there are diffrent output values for the gte and ge TPS. Why do you want to swap...
  7. A

    Best front lip for 86-88 Supra

    poodles pg.99 of the cartec supra if you have it please...
  8. A

    My (not so new) new wheels

    could be 20's with g35/350z offsets.
  9. A

    My (not so new) new wheels

    275/35/18 all around? are you lowered? LIP looks the same on the front and rear. Looks good.
  10. A

    Who Wants a Fabrication Section?????

    I dont think there should be a whole new section, a sticky would suffice . Also simple stuff such as putting gauges, bolting up things, body work ( painting,bondo ect. is not fabrication) . Fabricating components out of a variety of metal such as stainless, aluminum, steel. To make stuff...
  11. A

    my cars almost done *pics*

    Did it have the AFM cover when you bought it ? Looks real clean and stock.
  12. A

    MK3 in Kimbo vid..

    http://www.youtube.com/watch?v=D3_ndNwP-0k at 2:57 to 3:04 there is a red mk3 dropped with a bomex kit. :love:
  13. A

    ACIS and a vaccumm leak?

    While reading on a mr2 forum I found a thread that described the problem you were having. " is my ecu dieing? car bogging out I turn the car on after sitting lets say over night and it runs fine, will go into the upper rpm range no problem. Then after maybe 10 minutes or so of driving, it...
  14. A

    Weird code

    CRE , I tested FC and E1 in the AFM and they have continuity , according to the TSRM it should be infinite which means they should be open , right?
  15. A

    What now???

    I 2nd the notion of new TPS. If the current one fails you are not going anywhere.
  16. A

    Weird code

    The car is stock, nothing modified and the sound is coming from the fuel rail. I know the coil is good. I might have to look into the afm and distributor/wires/timing tomorrow.Thank you for your help.
  17. A

    Weird code

    CRE even before I did the fp to +B I can hear fuel moving. When I do the jump it just sounds higher in frequency.
  18. A

    Weird code

    I just re-read what I wrote and its nonsense for the fuel problem part. Upon reading the diagnostic codes there is no malfunction the ECU sees. I replaced a faulty TPS and a corroded fuel line. Also the car won't start, it cranks though. The pump does have me paranoid. Its noticeably loud inside...
  19. A

    Weird code

    So acouple of months ago I had complete TPS failure, it was binding and it didnt read out with a multimeter. I went to junk yard , got another sensor and adjusted it as per TSRM, installed it and nothing. I tried to pull codes but the check engine light just blinks with out stopping:1zhelp: or...
  20. A

    ATTENTION: Aeromotive AFPR users

    Iwantmk3 do you have any updates on your set up?
Top Bottom