Search results

have you tested the relay?

I am doing conversions... how much depends on exactly what you want done. PM me with the details: CC button backlights, CC selection LEDs, CC Temp display, Accessory & hazzard switches, window switch. I'm waiting on the CC for the first unit in which I am going to install one of the...

Not yet. I'm waiting on some hardware for the prototyping. I'm also trying to decide whether I should stick with 7 seg. displays for uniformity, or go with a LCD display with 3mm LEDs for the backlight for better legibility of the more involved displays (text)... matching colors on the LCD...

If he does that I'll pick up a set of both.... oh and perhaps the now hard to find clear front 89+ turns.

Okay, well while checking my oil tonight, I found out where I am loosing coolant from... stress fractures along the top of my rad. So, anyone figure out which one of these is the easiest to fit to our cars? The SR or the KA? Also, can anyone comment (from experience) on how easily the small...

AFAIK, taking the fuses for the security system won't disable the starter kill.

Excellent, using the common 4 LED wedge replacement, I presume? This is all academic for me, as I mentiond mine are white.

Oh, it'll work, I've tried it out too. There's a color shift to it that I didn't like, but yeah, it works. The color they shifted to when I tried it was something of a sea green... did yours turn out more vivid?

I don't have any pics right now. But, they're just white. And not glossy either. And they light up white. I had thought about blue LEDs, but the white looks pretty slick, so I may leave them white.

That's how I deal with replacing the green piece used for the turn signal indicators. That or, you could order tinted plexi.

For the display face I'm using some really lite (40%) window tint applied on the back side of the front mask. It looks VERY clean. I know PCBexpress is pretty inexpensive, for the limited run I needed it wasn't worth it though.

I'll trade you Kai. 3p........etc., by "tinted display covers" are you referring to something for changing the display's color a bit more, or just something to replace the green plastic filter which sits against the face of the CC? I etched the circuits myself. In such a small quantity...

I received my order from Kingbright today. The red is nice and bright, comparable to the other red 7 seg. displays I've used in other projects. The yellow I'd consider to be a bit on the dim side... nice color tone though, rather golden, between yellow and amber. The blue while...

Do you know whether it's the guage or the sensor? Before replacing the stock sensor I'd made sure ECU doesn't pull any reading from it.

I don't see why it wouldn't be possible without going turbo. You'll need a fuel computer though.... I'd probably go and add something for timing control as well, since the turbo's timing advance isn't as aggressive as the N/A's. A MAFT Pro or a SAFC II paired up with a MSD6 would cover those...

Grill and turns mount differently. They both mount to the support of the nose piece (IIRC), not the nose itself though... so which are we talking about here?

Seriously, just tell them you need a 55W H3 bulb for your fogs... they're very common.

Adding a fuel controller and a decent tune you would probably see some improvement (only because our cars run so damn rich), but it's most likely not worth it unless you plan on going turbo later and will still have a use for the controller. If you want to dump the "flapper" AFM you'll need to...

H3 Halogens 55W

^^^Yep, 99.9% of the time that's the case. You can bypass the dimmer by unplugging it and placing a jumper between the white wire with black stripe and the white wire with the green stripe. This will put the guages and CC to full brightness until you rebuild or replace the dimmer. I...