Search results

Sorta how the 2011 cars will be out in aug this year.

Any codes? Mods? Recently worked on?

Your not supposed to use the cork gaskets. They leak. Toyota never designed the car to use the cork oil pan gaskets. Only Toyota's FIPG or three bond.

The screw is usually for boost not sound. How was the vacuum hose going to the bov?

You need a noid light(12v light) for the light bulb thing to work. Are the injector clips in the right spot? Was the dist put in the right spot? Did you change the timing belt?

Rx7 donut maybe.

dam fine job.

Another vote for afm. Not all codes will trip the light. http://cygnusx1.net/Supra/TechTips/engine_error_codes.aspx

Car "should" still be able to start and idle with a bad afm. Verify spark. Verify fuel. Make sure the injector clips are in the right order. color of connector f-b white- brown- white- brown- white- brown. Did you put the dist in at tdc compression?

I would get the green plastigauge. There is a bolt on the side of the pump with a hole through it with check valve and spring. Shim the spring no more than 5mm of washers. Also have to shim the stock oil cooler relief spring with the same amount of washers. If your using a new oil pump it...

No. The front one is backwards. Take the cup part and push it in the block where all you have left is kinda flat.

Looking good with 4x4.

I thought it had to do with interior color. I have seen stock blue tint wiith blue interior and stock red/pink tint with maroon interior. Edit: its more of a hint of blue or red to the window not actually blue tint. Op why not just put some non dark tint on?

lol.

Heres a couple links for shim-less. http://www.supraforums.com/forum/attachment.php?attachmentid=42696&d=1079422673 http://www.supramania.com/forums/showthread.php?t=81797&highlight=shimless+valve+spring+buckets sry...

Iirc i remember the mk4 mounts being cheaper than the 89+ mounts. Just have to cut off a tab.

Hows the fluid level? Does it do this when you shift in P, R, or D?

Turn the cams to tdc and it should slide in. I used a snap-on 14mm 12pt deep.

http://lmgtfy.com/?q=compression+ratio+calculator

Sucks. I just got pulled over yesterday for exhaust and old purple tint with a 93db greddy sp exhaust(had ref sticker already tho).