Search results

How do you replace a blown fuse once the fender liner is in place?

Also, I would expect that plug to be sitting in your oil pan or close to it, at this point.

No, its for an added low pressure switch. I think we discussed this in another thread. Today i played with the oil cooler ciircuit.

Kinda like this- Straight shot. I wanted to minimize bends and turns. I plan to relocate the power steering resevoir to the front side of the rad, so I don't think that space will be an issue.

I would contact Topline. They include the lockrings for the piston pins with their piston sets, so either they make them, or they have a supplier. http://www.toplineauto.com/index.asp Otherwise, I'd try to see if any other toyotas use the same size lock rings. Hope that helps.

No. It comes on if the resevoir is low. It's a single resevoir.

No? Nobody likes electrical? Well, that's fair. After all, this is stage 2-drivetrain, and here I am, cheating with interior stuff. Ok, back to the engine then. Today, I received my AN-10 radiused, O-ring oil fittings, and so I worked on my oil cooler circuit. Made a mount for the remote...

Put a warning light/ buzzer into the gauge cluster for low oil pressure.

Decided to avoid getting greasy today, so i played with the gauge cluster. I wanted to install a warning light for low oil pressure, so i got started. Warning horn, led socket, and led with resistor. Cluster open, with needles removed. Small access hole through the back. Small hole drilled...

Not to be negative, but rodnkock does tend to be quieter when the motor's cold, and louder when it warms up. I was thinking that it could also be a very large valve shim clearance or two, but that would be very very gradual, not something you'd suddenly notice.

If you're planning on 86 rwhp, I suggest that you DO consider the weight of your sound system. :)

I did NOT know that. Thanks for the interesting read.

Well, that's just neat.

Precision 6266, journal bearing, .68a/r, undivided T4 housing, ordered. Poverty.....attained.

Yeah, i was under the impression that the maft pro has a decently high fuel tune resolution.

Damn- never knew that. To be clear, the na dist. Is NOT plug&play for a 7mgte due to wiring configuration, right? Otherwise, i could see used na distributors becoming alot more popular, lol.

Wells PS123, used on roughly a kajillion cars. Cost about $8 shipped from Ebay, and threads right in. I plan to install a single red led into the face of the oil pressure gauge, inline with a small Beeper, also mounted into the gauge cluster.

Hey Bogwon. No, ive never seen a modded harness for sale, but from the threads that ive read, it's not a difficult process. Once i get my harness, i post pics of the mod.

Correct. Have to order a new harness from DM today.

yup, looks stock.