Search results

On a 7M?

10x1.25x How ever long your stands posts are + 1"/25mm.

A bit hmmmmm "ethnic" Nate! :aigo:

I see 1psi between 2200>2400 and 1psi on a 3540 is quite impressive in itself and is usually more than enough for overtaking ;) (most times I don't even need to go positive to overtake) Nate: Really looking forward to some 7M 4067 results/data!

I had a set of custom Koni Coilovers made to my specs and they valved them perfectly, I can't describe how much better the car is over the Koni/Lower spring combo I had been using!

I have a Canton Filter mount coming this week to replace my Transdapt one as I was so impressed by the Remote Adaptor :)

Ken: As I said no one that has a 4067 on a 7M is running yet so it's all guesswork! Wheel diameter amd PMoI comes into play with this so you can directly relate the 2 turbos due to the variables. I'm "guessing" they're going to be close ;) I went for the big AR as I always intended to rev...

500 on pump changes things a bit Ken! You're going to have to sacrifice a bit of spool to flow the volume needed at low boost.

What's traction like in the low gears?

The Turbo is a cheap part of the equation ;)

Yep there is a GT30R I have one as well ;) I think a 3540R with a .82ar is about the perfect match for a stock redline 7M on the street!

Matt: Yep saw that! What do you mean by "it moves the wheels back 1"? As inwards?

Nope AP Racing 4 spots front and rear.

10psi with a 1.06ar here is 3600rpm :)

There are a bunch of BBK's out there already but I wanted something that uses off the shelf rotors as I consider them a disposable item so went with the DBA Kangaroo Paw rotors. I believe there is a 350z Nissan rotor that's a closer match but am not 100% on this.

It's NOT easy but man do you get STUNNING results! :) If you know someone with a medium size Lathe you're half way there! (as I said it's not even close to a bolton job)

1st issue is the front rotors won't fit over the Mk3 Hubs you need to remove 5mm. Next is the Centre holes in the Mk4 rotors are larger so spacers are needed, I had the front and rear suspension removed at the time so I ended up press fitting a spacer to all 4 hubs and machined it to size so...

Great Info! :)

Isn't it funny the Colour difference in the last few pics! Maybe Nates motor isn't so Barney IRL ;) Looking great Ron any ETA on the first start?

I run a remote filter so I wasn't concerned about it hitting the GTE mount but checked and while it was close it did clear it just.