Andy: A guy here in Australia got nailed recently after the Officer read his post ;)
And yes it's all fiction or it's been done on a closed private road....
If you can punch the broken stud out and get one back in through the hole you can start it by finger so it's knurling aligns in the hole then using some washers or a big nut over it to protect the Hub use a wheel nut to pull it through.
Over the next couple of days check it's torque with a...
CJ has it right.
Smaller Master = less pedal effort but longer stroke/spongy "feel"
Larger Master = more pedal effort but shorter stroke/improved "feel"
On my 240z I deleted the Booster and did it all with mechanical advantage and used 2 single circuit master cylinders that I had...
Merlyn: I've literally answered 1000's of questions in my time here over the years and am quite happy to continue to do so as long as the person asking has out a little thought and research into asking an intelligent question and NOT the gibberish asked in the thread.
I'm going to blow some Matt black paint over the AN fittings on my Trans Cooler as you can see it from behind the car for this reason ;)
(yours is 100x more visable)
Jake: Yep I'd do it ;)
Was going to do the feed/return on my Turbo but couldn't find anything that would cope well with the heat and the only firesleeve I could get was either Yellow or Red.....
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.