Search results

  1. I

    Brave Man

    "Lacey handles his balls" ;)
  2. I

    2 Piece Driveshaft from Shaftmasters

    LMAO that's gonna leave a mark ;)
  3. I

    please prove me wrong...

    If you overtighten the Cam Belt tensioner it deforms #1 cylinder wall causing low compression in that cylinder.
  4. I

    2 Piece Driveshaft from Shaftmasters

    J: Arrangements are in place for V just in case ;)
  5. I

    Brave Man

    I'd like to see the development vids before they got it right ;)
  6. I

    New turbo upgrade?

    The ends of the fins look much flatter to the incoming air so maybe this + the magic cover give the 50 ft/lbs? ;) (only way I'd believe it is to run my own back to back dyno session)
  7. I

    Introducing Myself

    Steve/15secreality: Welcome to SM :)
  8. I

    Anyone destroy a catalytic converter by running rich?

    Tek: Yes they're meant to be more robust ...... ;) And they flow better for a given size but as I said mine looks pretty sad the matrix is concave when you look into the Cat.
  9. I

    please prove me wrong...

    How tight is the cam belt tensioner done up? (hint: should only be 36ft/lbs)
  10. I

    Compression test results!!!

    I pop the cover and pack in some Castrol LMM grease then replace the cover so it will self prime in seconds ;)
  11. I

    BOSS Turbo with HKS boost controller

    You unclip the arm loosen the nut then the rod will turn. Holding the arm closed you adjust the rod so you have half the hole diameter as preload ie: Rod shorter by about 3mm. You can loosen the actuator mounting bolts to make refitting the rod and clip easier then tighten everything and...
  12. I

    What is the worst mistake you have ever done to your supra?

    Clip: Only ever seen the double length ones ;)
  13. I

    rollcage in a customer car!

    1515: Thanks dude :D (each day I wake is a bonus since then)
  14. I

    Traction control display

    The Grass isn't actually lush and Green it's dyed from 57 BHG's leaking onto it ;)
  15. I

    New turbo upgrade?

    Jon: It's a magic Compressor wheel with an equally magic ported Compressor cover that makes the difference ;) (the Garrett engineers missed this one when designing the GT series apparently)
  16. I

    *****HHEELLPP!!!!!!!!!!

    << Super Moderator ;) (I wear my underwear on the outside) It's late night here so no probs!
  17. I

    *****HHEELLPP!!!!!!!!!!

    If you look at the navigation panel on the left of that page you'll see "Starter" go there then "Starter Relay" and it describes the procedure to check it. For now I'd just roll start the thing so you can get to work then fix it later on.
  18. I

    *****HHEELLPP!!!!!!!!!!

    Check the starter relay
  19. I

    2 Piece Driveshaft from Shaftmasters

    Agreed! If you actually need this shaft it has to be 100% perfect if not just stick some Uni's and a fresh centre bearing in your stock DS. This is a niche product not a money saving exercise guys......