Search results

  1. I

    T-stat issue resolved and why it happened. With pics.

    It's an old school mod.... In some motors if you totally remove the T Stat the motor will actually overheat as the water moves through the Rad too fast so you gut the T Stat. Moroso sell "kits" with different sized plates.
  2. I

    Milo's Booster Seat...

    K: are you having trouble with your errection? ;)
  3. I

    Milo's Booster Seat...

    And that's the one allowed per page if you do it again you'll have to go to my room! :naughty:
  4. I

    Genna's (HiPsi) car

    Genna's car was an inspiration for me when I started playing with my car :)
  5. I

    Mystery coolant leak **PICS** (formerly Hole Corroded in Head)

    Another cause "stray current" I'd grab a pick or a small screwdriver and poke it to see if it is an actual hole and not a leak higher up before jumping to conclusions.
  6. I

    what does it take to get 500hp out of a 7mgte

    Jose: I've built a LOT of motors and have broken my fair share it's nothing to be ashamed of it happens, I never shy away from it and try and learn and move forwards. A lot of the big dogs are in the same boat but they keep their failures secret where mine are public knowledge, then there are...
  7. I

    Centralia or Bust! ......Delilahs build

    Seen the white inside the housings a few times and it's usually something in the fuel. The white on the outside looks like fluid leaks. Yes the crank bolt is normal righthand thread but it's 195 ft/lbs.
  8. I

    12.5 : 1 Cosworth pistons

    Don't need much dome to get 12.5:1 on a 7M by the looks of those :)
  9. I

    How many of us have automatics?

    You press the other pedal for that :)
  10. I

    How many of us have automatics?

    Ummm the T bar will move ;)
  11. I

    differential gear ratio

    Will: Yep if you get the whole pumpkin it is! (Also try and get the correct speedo gear for the trans)
  12. I

    Cannot find ct26 turbine to DP gasket, please point me in the right direction

    Use a smear of Copper high temp Silicone when you install it as the flanges won't be flat.
  13. I

    My apparent thermostat issue? or is it?

    John: Sounds like the case ;)
  14. I

    How many of us have automatics?

    Poodles: Man you really need to bring enough drugs for everyone ;)
  15. I

    Cannot find ct26 turbine to DP gasket, please point me in the right direction

    The genuine Toyota ones are very high quality compared to most of the Kit ones, not sure what you'll get from e-bay.
  16. I

    My apparent thermostat issue? or is it?

    If your cooling system is that marginal that you need the 10 degree runup it's time to do some work.
  17. I

    differential gear ratio

    Will: You can bolt any of the diffs in. Higher numbers = more acceleration Lower numbers = more top speed
  18. I

    Rear Brake Upgrade

    Some of the JDM MA70's came with 15" wheels so for a one stop type race (drag) those in good condition would be ample.