Search results

  1. I

    Doward's 375rwhp Build.

    Dow: The "Secret" with the metric brass plugs is to use a socket 2mm smaller with an extension to drive them in with the Minimum number of hits! Coat the plug with #4 Permatex tap it lightly in to start it straight/square then hit it HARD, if you use a lot of small taps the plug losses it's...
  2. I

    where to get tripple plate flywheel?

    Sorry never took any pics Will. It was just drilled and tapped and bolted down through the Converter bolt holes. I made an arbor out of an old Crank so it would all machine on centre. (I have a 7M one as well) If you use thicker plate you could machine the step in so it's the same as...
  3. I

    Time to come out and admit retarded mistake

    LOLing here :)
  4. I

    Staggered Head Work

    +1mm valves here Works well once the seats are opened up, I also opened up the ports 2>3mm to suit. I wouldn't do just the exhausts though.
  5. I

    Jay Leno is nuts... but I still like this hotrod.

    Saw it on TV gotta wonder what sort of mileage it gets ;)
  6. I

    where to get tripple plate flywheel?

    Will: When I built my twin for the Toyota 4v V8 in the Datsun they only ever came as Autos so I got a second Auto DP cut the ring gear off and bolted a piece of 1/2" plate steel to it machined it and had it surface ground. It worked perfectly ;)
  7. I

    where to get tripple plate flywheel?

    LOL ditto just remember it coming up in a discussion. (would make redrilling inpossible unless Will could snag an undrilled one)
  8. I

    where to get tripple plate flywheel?

    Bryan: Aren't JZ's 8 bolt?
  9. I

    Finally lowered!!

    <golf clap> for you
  10. I

    You know you're a Supra owner when...

    ^ x10 ;)
  11. I

    replacing headgasket

    Can't tell till the head's off but as a rule it will need to be resurfaced for a MHG.
  12. I

    Head gasket

    Carefully inspect the gasket around the dowel holes and if there's no cracks or other visual damage by all means strip the Viton off coat with Copper and reuse.
  13. I

    intake gasket

    Baboon: Fine as a temp stopgap to be replaced ASAP but as something to be used "forever" not good at all as the Cereal box doesn't have any tensile strength and will blow out eventually causing an unmetered leak and a lean condition in the closest cylinder and we all know how that usually ends...
  14. I

    Reasons for coolant in exhaust.. not bhg

    DOH sorry about that I'd hit "NEW POSTS" and hadn't looked at the section!! <self owned>
  15. I

    Reasons for coolant in exhaust.. not bhg

    Cracked Turbo centre housing maybe.
  16. I

    Fixing ACIS...

    Or plugged in backwards as there's an IN and an OUT on them.
  17. I

    Does anyone use sub-injectors?

    TMH: Exactly not to mention the puddle in the 3000 pipe when you slam the throttle shut on boost and the rich uneven distribution when you reopen it....
  18. I

    intake gasket

    Not pissed off at all I just get sick of reading stupid posts made by tight arses trying to make a million rwhp on 25c. (If I were pissed off you'd be banned by now) Frank: I don't think that's what was meant at all.
  19. I

    Hard time finding brass freeze plugs/welch plugs/expansion plugs

    LOL Can $$$ isn't so much of a joke now is it ;)
  20. I

    intake gasket

    Probably NOT a good idea to piss me off.
Top Bottom