Search results

Yes IJ ROH has a life time warranty for structure. They are australian mate.;) I never got the credit for my ADR m sportst hat cracked due to manufacturers defect. They cracked in a perfect circle aroundthe lip. They siad they are under warranty and are warranteed, but they never give me my...

Damn IJ mine was transdapt too. Whew gladI am not the only one IJ. When a master like you has the same problem I feel now that it is inferior for sure. ;)

I am going to get 18x10s in the rear and 18x9 up front.:evil2: They come standard silver or black. Other colorsare extra! The rear has a 3" lip

Well guys I decided to get a better oil filter mount yesterday. While I was redesigning my relocated filter set up, and oil cooler I cracked my oil thermostat and dual mount oil filter mount. These items are made of cast aluminum standardly and IMHO are inferior, albeit they do work. I am...

I use the mobile1 M301 filter. The filter is huge holds about a quart of oil, and it out shines all the rest. My relocation kit, and shimmed oil pump sees 100psi on start ups cold if I go over 2k rpms. The winter cold makes oil thick, and the pressure is higher than summer. During the winter...

You still don't get it....You can crack that filter and be out of oil in seconds just like I did, and while sittting at a light the motor stops because its out of oil. Then it's too late to do anything but rebuild. You have a disaster waiting to happen, and like me you know about it, and is...

[/B] there is a study on Supraforums about how terrible lucas oil would be to use. In the winter it will kill the motor it's so thick.:nono:

my oil filter is located under the front fascia and has scraped the pavement about 5 times now... i keep turning it so that an unscraped surface is exposed, but i seriously need to move My winter project was to repair a rod knock because of the same problem of the oil filter scraped a raised...

How are the fogs critical....they aren't that bright. I replaced them with aftermarket fogs, and they are nite and day asf ar as fucntionality brightness!

Figgie has a good relocation adapter. I have an Earls relocation billet adapter and it doesnt rotate to allow to place the fittings anyhwere that you like them. That is a good quality piece Figgie...good score. I may have to get one of those. I am using a b&M cooler 27066 I believe and a b&m t...

The clip side goes to the return side and the other side is the feed! I am using that t-stat. It is on the website also...the directions that is

There is a meet in new jersey on the 20th weekend by a supra forums member!

You are the man Ian...

I remember, but back then I asked if it can be duplicated especially after you emailed me the top end est speed specs!

That wasn't very nice...Nash may be dyslexic but he isn't an ass like you. You havent been around long but grow up to respect the problems of others. He is a very smart idividual. Wzup Nash! Respectfullly put as possible Anthony

Thanks Guys...I have been busy taking care of peronal issues Joe you can call me at 646 245 5908. Ian man we all know that this is your forum. Hell a few years back we were just IM homies. Now your expertise is finally being recognized. You know I still would like that bolt up replica for that...

Well for those of you that don't know me I have been here forever, but since the original forum went down I haven't had much time to post here. I mostly post on supraforums. I started my project in 2004 with a rebuild, and slowly wentfrom a gt4082 to a FFI, and GT4088 turbo from Garrett with a...

I see some pretty large Intercoolers and some pretty small turbos, you guys havent got a clue to what size IC is needed for a given turbo. Personally you will not need bigger than a 12x24x3 for 98% of the guys in this forum. The larger the IC the higher the lag or spool time. Even with my GT4088...

Was in an accident and replaced with this white one. One day I will change avatar but not now.