Search results

Free reving won't build boost... Unless you're a damn SRT-4.

What video card and what games? The newest nvidia drivers have issues (I use EVGA Precision and don't have a problem, but I force higher fan speeds in games anyway) http://www.bluesnews.com/s/108047/nvidia-driver-issue

No load = no boost.

No shroud = bad idea. Stock fan will flow more, not sure on the fitment of the radiator as the early ones fit terribly...

Rotary motors are COMPLETELY different motors. They don't produce a lot of torque but are fine at high revs.

I'ma slap you...

Those style tops seem to work with the Cusco pillowball mounts (I have em on my car, I'd need to get pics). I'm not entirely sure on my setup though as I got them used.

IIRC jdub recommends the mobil 1 synthetic ATF in this case.

Well, he's pulling them out anyway ;) The TSRM says to label them as to not mix them up as well.

I'm so going to hell :rofl:

The races come out when you pull the diff out. http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=RA&P=31 Races are matched to the bearing, don't mix them (this goes for new too).

I thought the access hatch was for the fuel sender?

Yarp, the miata is a typical 3rd member. The case is all once piece on ours making the shims a pain. But hey, at least our oil seals are easy to do without screwing up the preload as you can replace the crush sleeve without pulling everything apart...

Um.... no. 6500RPM is high for it's stroke and age. Stock SBC's would be pushing it at 5K and usually are well out of their power band by then. The main limiter to revs is valvetrain. After that it's the bottom end.

You're not in the states ;)

All MKIII's are A70's. MA70 is a 7M, JZA70 is 1JZ, GA70 is 1G. Those are chassis codes. The MA70 or MA71 is on the VIN number to differentiate GE and GTE.

No, didn't come on 7M's. Many of Toyota's modern motors are VVTi

Naw, it might spool a little quicker in theory, but a good BPU 7M will spool around 2500RPM as is so it's pointless and a waste of cash. I know of only one person that did it....and he's from Florida as well...

Correct, same idea.